PW LADDER TRAY TD / TU A VERTICAL TEES VX A VERTICAL CROSS VX TEE DOWN A H TD 3" tangent B R W 3" tangent A A 3" tangent R TU WIDTH W RADIUS R RAIL HEIGHT H A 24 4 5 6 7 58 59 60 61 H ALL W TEE UP fittings have rungs or bottom members for cable support across the bottom of the fitting. WIDTH W ALL H W B TEE UP A R CS A VERTICAL CABLE SUPPORT ELBOW CS RADIUS R RAIL HEIGHT H A B 24 4 5 6 7 58 59 60 61 31 32 33 34 H A W 3" tangent R A Supports cables at the top of long vertical drops where the weight of the vertical cable may be excessive. Hooks (sold separately) attach to the brace in the elbow; when used with cable grips (supplied by others), tension in the vertical cable is relieved and transferred to the elbow. WIDTH W ALL Elbows, Reducers 1 pair ea. Tees, Wye 2 pair ea. Crosses 3 pair ea. RAIL HEIGHT H A 24 4 5 6 7 31 32 33 34 ITRAY VERTICAL TEE CATALOG NUMBERING EXAMPLE: BOTTOM TYPE LD-4 A -TU24-09 VENTED LD - Ladder Rung VC - Vented Corrugated NON-VENTED SC - Solid Corrugated SB - Solid Bottom RAIL HEIGHT 4 - 4" 5 - 5" 6 - 6" 7 - 7" FITTING CODE MATERIAL A TU TD RADIUS 24 - 24" WIDTH 06 - 6" 09 - 9" 12 - 12" 18 - 18" 24 - 24" 30 - 30" 36 - 36" ITRAY - FITTINGS CONNECTORS/SPLICES - Necessary fitting connectors (FSP) and fasteners are supplied with each section per the below chart. Extra connectors for field cuts or unusual requirements must be ordered separately. RADIUS R B.25 For detailed material and finish descriptions, see page B.6. WWW.LEGRAND.US/CABLOFILhttp://WWW.LEGRAND.US/CABLOFIL