PW LADDER TRAY LONG-SPAN A ALUMINUM G HOT-DIP GALVANIZED STEEL Trays for extremely heavy loads and long spans have I-beam side rails and are available in lengths up to 50'. WIDTHS (W) INCHES 12 18 24 30 36 RAIL HEIGHTS (H) INCHES 8 10 LENGTHS (L) FEET 30 40 50 METALLIC STRAIGHT SECTIONS - LONG-SPAN 4 CONCENTRATED LOAD: All ladders will support a 200 lb. concentrated load applied at the center of the tray in addition to the NEMA-rated cable load without collapse. RAIL FLANGE (IN.) 8 6* 10 5 2 1/4 4 4 20C+ - SERIES 6* E, 6M TRAY SYSTEM NUMBER ][-][ 4823 2000 S2 4812 2000 S2 4904 2000 TRAY SYSTEM NUMBER AMP RATING ][-][ S2 1952 600 S2 1953 600 S2 1954† 600 * 6" load depth is the maximum permissible by NEC; † Fittings not available B.34 WWW.LEGRAND.US/CABLOFIL AMP RATING S2 SERIES 10 LOAD DEPTH (IN.) Allowable cable load in pounds per linear foot uniformly distributed. Based on tray with standard rung on 9" centers and supported on simple beam with safety factor of 1.5 per NEMA VE1. 20C+ CSA CLASS 2 1/2 CSA CLASS 6* SAFE LOAD: NEMA CLASS RAIL FLANGE (IN.) 3 8 NEMA CLASS LOAD DEPTH (IN.) 6* RAIL HEIGHT (IN.) Necessary connectors and fasteners are supplied with each section. Extra connectors for field cuts or unusual requirements must be ordered separately. RAIL HEIGHT (IN.) CONNECTORS/SPLICES: LADDERhttp://WWW.LEGRAND.US/CABLOFIL