Cablofil Cable Management Catalog 2018 - B.59

PW LADDER TRAY

PRODUCT
NUMBER

Use across all discontinuities, expansion joints, and adjustable
connectors to maintain electrical continuity in the cable tray
system. Also use to bond the cable tray system to the building
ground. Bonding jumpers are not required at standard or rigid
splice locations. Fasteners for laminated bonding jumpers are
included; fasteners for insulated jumpers must be ordered
separately.
LAMINATED ALUMINUM (BJ ONLY)

A

LAMINATED ALUMINUM

BONDING JUMPERS

INSULATED COPPER
15"

Laminated Aluminum: (4) 3/8" x 1¼" bolts per bonding jumper
(included).
Insulated Copper: Made with flame-retardant, moisture- and
heat-resistant, insulated copper cable. Tin plated copper lugs
have one hole, sized for 3/8" x ¾" bolt. Length is 15" to the
center of the lug holes. Special lengths, lugs, and cables are
also available.

BJ

L

RATED AMPS
(N.E.C. 250-122)

21 ¼"

2000

CATALOG NUMBERING EXAMPLE (EA:):
Material

Fasteners

ABJ - 2000 - GE

INSULATED COPPER

C

PRODUCT
NUMBER

COPPER
CABLE SIZE

RATED AMPS
(N.E.C. 250-122)

A806
A807
A804
A803
A808
A809
A805
A810

#6
#4
#2
#1
1/O
2/O
3/O
4/O

200
300
500
600
800
1000
1200
1600

A814*

4/O WELDING
CABLE 2107
STRANDS

1800

CATALOG NUMBERING EXAMPLE (EA.):
Material

C - A806

*Length is 30" to the center of the lug holes. One-hole
tin-plated copper lugs are sized for ½" bolt. A814 is
the only insulated copper bonding jumper that is
compatible with Itray, as the other sizes are 15".

SPLICE FASTENERS
Knurled Bolt: Specially designed for cable tray
connectors, the ribbed neck firmly grips the tray side
rail to prevent screw rotation while tightening. Bolt
can also be tightened with a Phillips screwdriver.

Locking Hex Nut: For use with expansion
connectors. Deformed threads cause this nut to
lock on to the bolt after just a few turns, allowing
movement of the bolt in the expansion slot without
possibility of the nut backing off. Typically identified
by a rectangular indentation on the side of the nut.

KNURLED
BOLT
FLANGED
HEX NUT
LOCKING
HEX NUT
FLAT
WASHER

SIZE
/8"-16 x ¾"

3

/8" DIA.

3

/8" DIA.

3

/8" DIA.

3

COMPLETE
CATALOG NUMBER

DS-8926-01-GE
DS-8926-01-S6
DS-8927-01-GE
DS-8927-01-S6
DS-8576-02-GE
DS-8576-01-S6
DS-8600-01-GE
DS-8600-01-S6

GE
S6
GE
S6
GE
S6
GE
S6

Flat Washer: For use with expansion connectors.
Install under the locking hex nut in the expansion
slots. Prevents binding in the expansion slot during
movement of the tray due to thermal expansion.

METALLIC SPLICES & CONNECTORS

Flanged Hex Nut: "Free spinning" lock-type nut with
a serrated face, eliminating the need for a washer.
Nuts require a 9/16" wrench. Tighten to approximately
17-23 ft-lbs of torque.

DESCRIPTION

RAIL HEIGHTS (H) INCHES
4 5 6 7

For detailed material and finish descriptions, see page B.6.

B.59
WWW.LEGRAND.US/CABLOFIL
http://WWW.LEGRAND.US/CABLOFIL
Cablofil Cable Management Catalog 2018

Table of Contents for the Digital Edition of Cablofil Cable Management Catalog 2018
