PW LADDER TRAY BLIND END PLATE M T G* Seals off the open end of a cable tray. Attaches to the tray using standard 3/8" dia. connector fasteners. PRODUCT NUMBER FASTENER OPTIONS 0402 GE S6 CABLE DROPOUT A Width G* Provides a smooth, rounded surface for cables dropping out of the bottom of the cable tray. PRODUCT NUMBER R 3/4 5 0253 0254 CATALOG NUMBERING EXAMPLE: Height/Material T FASTENER OPTIONS Fasteners 4T - 0402 - 12 - GE ZN S6 CATALOG NUMBERING EXAMPLE: Material -Flange Width Fasteners MI-0253-06 -S6 WALL PENETRATION SLEEVE M G T Provides a rigid support for cable tray at wall penetrations. Overall length of the sleeve is 20". Will fit walls up to 8" thick. Bonding jumpers are not required for use with wall sleeves. Two pairs of splice plates and fasteners are included for tray attachment. SERIES1 SERIES2 PRODUCT NUMBER FASTENER OPTIONS 0424 GE S6 TRAY WIDTH (NOMINAL) 6 9 12 18 24 30 DROPOUT WIDTH (FLG IN) 1 2 /4 1 5 /4 1 8 /4 1 14 /4 20 /4 26 /4 321/4 IN DROPOUT WIDTH (FLG OUT) 51/4 81/4 113/4 173/4 233/4 293/4 353/4 1 OUTDOOR CONVERSION KIT FOR WALL PENETRATION 36 G T Makes ladder tray wall penetrations weather resistant to minimize water intrusions. Removable cover/shield fastens to tray and wall penetration sleeve for the utmost in weather protection. * Fits Standard Hot-Dip Galvanized or Stainless SERIES1 "0424" or "0440" wall SERIES2 penetrations (see page B.62, B.68.) * Sized to fit flange-in or flange-out trays CATALOG NUMBERING EXAMPLE: Connector System No 1 Width Fasteners 4T2 - 0424 -12- S6 PRODUCT NUMBER FASTENER OPTIONS 0434 GE S6 METALLIC ACCESSORIES CATALOG NUMBERING EXAMPLE: B.62 Connector System No Width Fasteners 4G2 - 0434 -06- GE The wall penetration sleeve and outdoor conversion kit are designed to fit Series 1 and 2 systems. When ordering, however, they should be specified as Series 2. G* = optional WWW.LEGRAND.US/CABLOFILhttp://WWW.LEGRAND.US/CABLOFIL