PW LADDER TRAY SINGLE HANGER CHANNEL A M G T TRAY WIDTH Made from 12-gage strut. Hangers have 9/16" diameter holes 13/16" from each end to accept 1/2" threaded rod. Kit includes fasteners. When used with Z-type hold-down clamps, select hanger with flange out dimensions. SINGLE HANGER CHANNEL KIT* 15/8" 15/8" L 6 9 12 18 24 30 36 PRODUCT NUMBER HANGER KIT 0373 0393 FLANGE IN L (W+4) 10 13 16 22 28 34 40 FASTENERS INCLUDED WITH KIT ONLY* L FLANGE OUT L (W+10) 16 19 22 28 34 40 46 ZN S6 CATALOG NUMBERING EXAMPLE: 13 /16" Material 13 DOUBLE HANGER CHANNEL A M G T TRAY WIDTH Made from 12-gage struts welded back-to-back. Hangers have 9/16" dia. holes 13/16" from each end to accept 1/2" threaded rod. When used with Z-type hold-down clamps, select hanger with flange out dimensions. DOUBLE HANGER CHANNEL KIT* 15/8" L 31/4" Length Fasteners M- 0393-10 - S6* /16" DIA. 6 9 12 18 24 30 36 PRODUCT NUMBER HANGER KIT 0371 0394 FLANGE IN L (W+4) 10 13 16 22 28 34 40 FASTENERS INCLUDED WITH KIT ONLY* L FLANGE OUT L (W+10) 16 19 22 28 34 40 46 ZN S6 CATALOG NUMBERING EXAMPLE: Material 13 /16" CENTER HANGER CHANNEL 9 Length Fasteners M- 0394-16 - S6* /16" DIA. M G T TRAY WIDTH CENTER HANGER CHANNEL KIT* 15/8" 6 9 12 18 24 HANGER KIT 0369 0395 FLANGE IN L (W+2) 8 11 14 20 26 FASTENERS INCLUDED WITH KIT ONLY* FLANGE OUT L (W+6) 12 15 18 24 30 ZN S6 CATALOG NUMBERING EXAMPLE: 15/8" Material Length Fasteners M- 0395-10 - S6* L L B.65 *Kits include hardware for ladder trays. Contact Legrand for other design options. For detailed material and finish descriptions, see page B.6. METALLIC ACCESSORIES Mounts with one 1/2" threaded rod to allow cable installation from both sides. Cable should be loaded evenly on both sides of the center support to remain level. 12-gage strut accepts channel nuts for hold down clamps with no drilling required. Not recommended for trays over 24" wide. When used with Z-type hold-down clamps, select hanger with flange out dimensions. PRODUCT NUMBER WWW.LEGRAND.US/CABLOFILhttp://WWW.LEGRAND.US/CABLOFIL