PW LADDER TRAY 20" FIRE WALL PENETRATION SLEEVE M G T This firestop system provides a rigid support for cable tray in a UL classified system approved for fire wall and floor penetrations. After Cable trays are attached to both the sleeve is placed in the wall or floor, of the sleeve using standard theends loose collar slides over it. Hardware for the tray connection splice plate connectors only is included. Hardware required to mount sleeves to the wall or floor is not included. Fixed collar is welded to sleeve W*+6" FASTENER OPTIONS PRODUCT NUMBER 0440 GE S6 W*=Nominal Tray Width H*=Tray Side Rail Height SIDE VIEW 20" Loose collar slides over sleeve after it is placed in the wall Wall Assembly (Gypsum Wall Shown) Cables AdjustableCollar Hilti Fire Blocks Fabricated cable tray fire stop sleeves from Legrand, combined Loose collar slides sleeve after it with Hilti over Firestop products, are an economical alternative is placed in the wall to the high cost of fabricating protective fire wall and floor penetration sleeves in the field. Penetration Sleeve 7/16" diameter holes 3/8" hardware The Hilti for Fire Block is a compressible fire stop brick, well-suited (not included) for installations where frequent cable changes may be required. Blocks are easily cut to fit any space, and can be removed and H*+6" reinstalled when cable configurations change. When exposed to fire, the blocks expand to lock the seal in place. Each cable tray firestop sleeve includes: * One penetration sleeve with flanges * Hilti Fire Blocks * One Hilti Firestop Putty Stick * Hardware for cable tray connection to the wall sleeve: Hilti Fire Blocks - Metallic and fiberglass cable trays with two side rails. The Firestop kit includes two pairs of splice plates with nuts &Fixed bolts; 316 stainless steel is recommended for use Collar with fiberglass systems. Floor Assembly Cables Fixed collar is welded to sleeve Cable trays are attached to both ends of the sleeve using standard splice plate connectors Adjustable Collar Wall Anchors (Not Included) Fixed Collar SLEEVE Masonry Anchors (Not Included) WIDTH 4 6 9 12 18 24 30 36 Penetration Sleeve END VIEW W*+6" NUMBER OF HILTI FIRE BLOCKS INCLUDED WITH EACH SLEEVE 7/16" diameter holes for 3/8" hardware (not included) H*+6" 2 3 3 5 6 8 9 SIDE RAIL HEIGHT (IN.) 5 2 3 4 6 8 10 12 W*=Nominal Tray Width H*=Tray Side Rail Height METALLIC FIRESTOP SYSTEMS OUTDOOR CONVERSION FOR WALL PENETRATION (0434) See page 62. Hilti Fire Blocks Cables Fixed Collar Penetration Sleeve B.68 Floor Assembly Adjustable Collar Masonry Anchors (Not Included) Penetration Sleeve * Wall Penetration Sleeve (WPS or FWPS) not included in kit, must be ordered seperately WWW.LEGRAND.US/CABLOFIL UL classified for use with: 2-hr concrete or block walls 2-hr concrete floors 1-hr gypsum walls 2-hr gypsum walls 6 3 4 5 7 9 12 14 7 3 4 6 8 11 14 16http://WWW.LEGRAND.US/CABLOFIL