PW LADDER TRAY FLAT COVER DRIVE RIVET Covers are highly recommended to avoid damage to the tray contents and to protect against the elements. Flat covers are available for both straight sections and fittings. Covers are made from fire-retardant polyester resin per ASTM E84 Class 1, light gray color. Standard cover thickness is 1/8" and length is 10'-0". Side rail height is necessary for outside vertical fitting covers. Please contact Legrand for more information. COVER LENGTH (FT.) SYSTEM NUMBER 10 7130 Only for use with indoor, horizontal covers. Drive rivets are the most economical method of cover attachment. Requires field drilling. Install on 24" centers. COMPLETE CATALOG NUMBER DS-8935-PL FLAT COVER CONNECTORS For use with indoor, outdoor, or vertical flat covers. The 1400 cover connector is 1" wide fiberglass. Install one connector over each cover joint and 36"-48" spacing between joints. CHANNEL-STYLE F APPLICATION FIBERGLASS COVER & ACCESSORIES CHANNEL FASTENERS INCLUDED 1400 FG S6 CATALOG NUMBERING EXAMPLE: System No. Width Fasteners 6FI- 1400 -24-S6 FIBERGLASS FLAT COVER CATALOG NUMBERING EXAMPLE: LENGTH OR PRODUCT FITTING NO.. 7130 - 0010 - 36 WIDTHS (W) INCHES TRAY SYSTEM NUMBER 6 9 12 18 24 30 36 FIBERGLASS PREFIX OPTIONS RAIL HEIGHTS (H) INCHES 4 6 LENGTH (L) FEET B.76 PRODUCT NUMBER 10 F1 SERIES1 F2 SERIES2 FI Flange In WWW.LEGRAND.US/CABLOFIL This identifies the specific tray design and is used as a product number prefix for straight sections. LENGTH 0010 - 10' or 9112 FITTING PRODUCT NO. This identifies fitting type and radius WIDTH 06 - 6" 09 - 9" 12 - 12" 18 - 18" 24 - 24" 30 - 30" 36 - 36"http://WWW.LEGRAND.US/CABLOFIL