PW LADDER TRAY ADDITIONAL RUNG F Add or replace a tray rung using the hardware provided. Field drilling may be required. Rungs include factory-installed threaded collets. BLIND END PLATE F Seals off the open end of a cable tray. Attaches to the tray using standard 3 /8" dia. connector hardware. CABLE DROPOUT T Provides a smooth, rounded surface for cables dropping out of the bottom of the cable tray. RAIL HEIGHTS (H) INCHES 4 6 PRODUCT NUMBER FASTENERS PRODUCT NUMBER FASTENERS RADIUS 8200 S6 0402 S6 FG 5 CATALOG NUMBERING EXAMPLE: Material Width Fasteners F- 8200 -12-S6 CATALOG NUMBERING EXAMPLE: System No. Width Fasteners Straight strips are for use with all straight ladder tray; flexible strips are for use with all horizontal fittings of any radius. Field-drilled holes are required for installation of all divider strips. Clips should be attached to rungs on alternating sides of the divider strip. LENGTH (FT) 10 STRAIGHT HORIZONTAL 0010-99 (5) THERMOPLASTIC DRIVE RIVETS INCLUDED RAIL HEIGHTS (H) FLEXIBLE HORIZONTAL 0606-99 (4) HOLD DOWN CLIPS INCLUDED INCHES Sealant SEALANT TYPE 4 6 STRAIGHT HORIZONTAL DIVIDER TYPE VERTICAL 90° INSIDE ELBOW VERTICAL 90° OUTSIDE ELBOW FIBERGLASS ACCESSORIES FLEXIBLE HORIZONTAL DIVIDER VERTICAL 45° INSIDE ELBOW VERTICAL 45° OUTSIDE ELBOW VERTICAL FITTING DIVIDER VERTICAL 30° INSIDE ELBOW VERTICAL 30° OUTSIDE ELBOW WWW.LEGRAND.US/CABLOFIL S6 THERMOPLASTIC DRIVE RIVET COMPLETE CATALOG NO. PRODUCT NUMBER PRODUCT NUMBER LENGTH (FT) 6 PRODUCT NUMBER RADIUS 9112-99 9124-99 9136-99 9212-99 9224-99 9236-99 4612-99 4624-99 4636-99 4712-99 4724-99 4736-99 3112-99 3124-99 3136-99 3212-99 3224-99 3236-99 12 24 36 12 24 36 12 24 36 12 24 36 12 24 36 12 24 36 DS-8935-PL HOLD DOWN CLIP F COMPLETE CATALOG NO. F-1852-PL (3) THERMOPLASTIC DRIVE RIVETS INCLUDED FIELD CUTTING SEALANT Used to reseal fiberglass after field modifications. Available in quart and gallon sizes. Includes two brushes. SIZE CATALOG NO. QUART 0941-Q GALLON 0941-G FIBERGLASS PREFIX OPTIONS (2) HOLD DOWN CLIPS INCLUDED F1 CATALOG NUMBERING EXAMPLE: System No. SERIES1 F2 SERIES2 FI Flange In 6F- 0010-99-PL B.78 0254 TI- 0254 -24-S6 F TYPE FASTENERS CATALOG NUMBERING EXAMPLE: System No. Width Fasteners 6FI- 0402 -12-S6 DIVIDER STRIPS PRODUCT NUMBERhttp://WWW.LEGRAND.US/CABLOFIL