PW LADDER TRAY CABLE RUNWAY STANDARD DESIGN 1½" TUBULAR SIDE RAIL 0.50" (12.7mm) 1.50" (38.1mm) 2.00" (50.8mm) Optional: Standard: Black(BK) 1.00" (25.4mm) Yellow Zinc Dichromate (YZ) Light Gray (GY) 1.00" 0.375" (9.5mm) 0.375" (9.5mm) CABLE RUNWAY OPTIONAL DESIGN 0.50" (12.7mm) 2.00" (50.8mm) 1.00" (25.4mm) 0.375" (9.5mm) 2" TUBULAR SIDE RAIL 0.50" (12.7mm) STANDARD DESIGN 1.50" (38.1mm) TYPE 2.00" (50.8mm) TUBULAR OPTIONAL DESIGN 0.375" (9.5mm) TUBULAR PRODUCT RAIL 0.50" NUMBER (12.7mm) HEIGHT* 1.00" (25.4mm) 8104 1½ 2.00" RAIL HEIGHTS (H) INCHES (50.8mm) SUPPORT SPAN (FT.) SAFE LOAD (LBS./FT.) / DEFLECTION (IN.) 1.5 2 1.00" 4 (25.4mm) 248 0.41 159 0.63 110 1.19 81 1.24 62 1.62 300* 274 0.65 190 0.93 140 1.27 107 1.66 5 6 7 8 0.375" (9.5mm) 2 8204 6 9 12 18 24 LENGTH (L) FEET 0.29 1.00" WIDTH (W) INCHES 10 0.375" (9.5mm) * 1½ tubular rail height is standard; and 2" tubular rail is optional and available by special order only. DEFLECTION: Side rail deflection measured at the midspan of the runway, based on simple beam type supports and uniformly distributed loads. When trays are erected in a continuous system, the midspan deflection decreases by as much as 40%. STRAIGHT SECTION CATALOG NUMBERING EXAMPLE: PRODUCT NO. 09-8104-0010-12BK MATERIAL: Rectangular Steel Tube per ASTMA-513. CONSTRUCTION: Tubular rungs are attached to side rails by arc welding. RUNG SPACING 09 - 9" TRAY LENGTH 10' Actual runway length is 116½" without connectors WIDTH 06 - 6" 09 - 9" 12 - 12" 18 - 18" 24 - 24" COATING COLOR BK - Black CABLE RUNWAY STRAIGHT SECTIONS SAFE LOAD: Allowable uniformly distributed load based on simple beam type supports with a safety factor of 1.5. Safe load data is based on the performance of the cable runway side rails. An asterisk (*) denotes rung limitation. B.81 For detailed material and finish descriptions, see page B.6. WWW.LEGRAND.US/CABLOFILhttp://WWW.LEGRAND.US/CABLOFIL