V-TROUGH INSTALLATIONS TROUGH TRAY ATTACHING TO WALL OR FLOOR SUPPORTS Securing ventilated tray to supports is easy. For attachment to the FAS U or CS series support, use the FTFCL. It simply snaps in place. For securing solid tray use the FTHDCL Tray Hold Down Clip. Both allow a cover to be used. TRAPEZE SUPPORTS For trapeze mounting, three options are available: The FTCH and FTCHC Center Hangers both require only a single threaded rod. The FTAS Trapeze Hanging Clip requires two 3/8" threaded rods, but allows cables to be side loaded. Folding tabs secure tray to supports. Covers can be used with FTCHC but not FTCH or FTAS. FTCHC CENTER HANGER FTCH CENTER HANGER FTAS TRAPEZE HANGING CLIP FTAS TRAPEZE HANGING CLIP COVER ATTACHMENT OPTIONS INSTALLATION GUIDELINES Complete the security of your cables with covers. These cover sections can be cut to fit with a reciprocating saw and simply snap on. For additional security, use the FTCFCL Cover Fastening Clip. This clip can be used in conjunction with splicing hardware to keep covers secure. C.27 WWW.LEGRAND.US/CABLOFILhttp://WWW.LEGRAND.US/CABLOFIL