FASTENERS WALL BRACKETS Pregalvanized components for single and multiple gangs. Wall brackets make prefabricating switch and outlet assemblies easy. The design includes mounting holes and slots to accept far side supports (sold separately). Construction: 18 gage pre-galvanized steel. UL Listed. Prefabrication: The design accepts 4" and 5" plaster rings and 4", 4-11/16" and 5" square boxes mounted horizontally or vertically. W1 Installation: Pre-drilled holes are provided for attachment screws to the studs. Far Side Support Arms attach to the back of the bracket to support the assembly against the wall behind. No attachment hardware is needed. Symmetrical design allows simpler and easier prefab Keyhole Openings allow 4", 4-11/16" and 5" x 2-1/8" boxes to remain attached when plaster ring is removed Counter Sunk Box Attachment Holes for 4-11/16" x 2-1/8" boxes allow 4" rings to be mounted independently Support Arms are attached to the back of the bracket using the two slots provided. Stud alignment tabs - (W1, W34, W4 only) Wall Bracket attachment holes WALL BRACKETS * Wall brackets accept 4" and 5" plaster rings and 4", 4-11/16" and 5" square boxes mounted horizontally or vertically. * Keyhole openings allow 4", 4-11/16" and 5" x 2-1/8" boxes to be mounted independently. * Pre-drilled for attachment with screws to the studs. W2 W4 W3 W16SSL* D.24 WWW.LEGRAND.US/CABLOFIL W34 W24SSL* PKG. QTY. OPENINGS HEIGHT WIDTH PG IN IN 8.5 FP211097 W1 25 1 5 W2 25 2 5 11 FP211101 W3 25 3 5 16.75 FP211103 W4 25 4 5 26 FP211105 W34 25 3 5 26 FP211104 W16SSL 25 16" Slider 6 16.75 FP211100 W24SSL 25 24" Slider 6 26 FP211102 * 16" and 24" slider brackets allows electrical boxes to be adjusted horizontallyhttp://WWW.LEGRAND.US/CABLOFIL