FASTENERS CPPB/CPSB CABLOPORT BRIDGE SERIES WITH FAS P OR CHANNEL SUPPORT * Designed as sleeper for HVAC units, cable pathways, roof walkways or other applications. * Two (2) bases bridged with 1 5/8" galvanized channel (12 ga.) or FAS P. * Install on any roofing material or other flat surfaces. * Supports are available in one standard finish and two optional finishes. * Channel can be used to support wire mesh tray (secure with FS41 Spring Clips). * Maximum load 500 lbs. CPSB10-28 with Channel Support SUPPORT HEIGHT SUPPORT LENGTH BASE LENGTH WEIGHT PG GC INCHES MM INCHES MM INCHES MM LBS KG STANDARD FINISH OPTIONAL 5.0 125 28.0 710 9.6 240 13.4 6.1 943 637 - CPSB10-28 5.6 140 28.0 710 9.6 240 13.6 6.2 943 642 - CPSB10-36 5.6 140 36.0 900 9.6 240 14.9 6.8 943 643 - 5.6 140 42.0 1050 9.6 240 - - 943 644 - CPSB10-50 5.6 140 50.0 1270 9.6 240 - - 943 645 - CPSB10-60 5.6 140 60.0 1524 9.6 240 - - 943 646 - CPPB10-28 CPSB10-42 FAS P STRUT - Contact manufacturer for availability. CPSA CABLOPORT VARI-ANGLE SERIES WITH CHANNEL SUPPORT * * * * * Designed to adapt to any roof pitch or uneven surface. Install on any roofing material. Easily adjusted onsite. Leg adaptor will accommodate 1 5/8" x 1 5/8" channel framing. U-shaped 1 7/8" x 1 7/8" leg adaptor pre-drilled with 9/16" mounting holes is pre-mounted to base. * Maximum load 500 lbs. CPSA20PG SUPPORT CPSA20 STRUT BASE LENGTH INCHES MM INCHES MM INCHES 5.6 140 6.0 150 9.6 240 8.0 3.6 943 667 5.6 140 6.0 150 19.5 500 13.3 6.0 943 668 LBS KG CABLOPORT CPSA10 BASE WIDTH MM WEIGHT PG BASE HEIGHT Vertical 1 5/8" x 1 5/8" strut and horizontal crossbar not provided. D.35 WWW.LEGRAND.US/CABLOFILhttp://WWW.LEGRAND.US/CABLOFIL