FASTENERS SEISMIC BRACING Legrand Seismic Wire Rope/Cable™ Bracing is the recommended seismic bracing for Legrand wire mesh and ladder tray systems. It is UL Listed, complies with all building codes and standards, and offers significant advantages over rigid bracing systems using pipe or strut. With these products, a contractor can go up on a ladder or lift with everything needed for a brace location in one pocket. There's no need to deal with heavy, bulky pipe or strut - which is also difficult to cut and costly to ship. Take a look at these important differences: CABLE BRACING VS PIPE/STRUT BRACING Lightweight, easy to carry Heavy, bulky, hard to handle Low cost-per-foot High cost-per-foot Significant shipping cost savings Expensive to ship Saves energy in shipping - a "green" choice A huge carbon footprint Easy to cut with one hand Needs a machine to cut Can be cut anywhere, even on ladder/lift Needs to be cut at floor cutter location Can be used at any length Limited in length Simple, fast installation Difficult installation Low-cost mounting hardware (URCs/NPCs) Expensive mounting brackets Large cable sizes stronger than pipe/strut Limited in strength 2 URCs needed at trapeze 4 brackets needed at trapeze SEISMIC BRACING The Legrand quotation team can help identify when seismic bracing is required on a construction project (due to geographic area and/or project type) and provide a combined tray and bracing quote. It's an easy way to increase sales while also making the job easier for electrical contractors. D.36 WWW.LEGRAND.US/CABLOFILhttp://WWW.LEGRAND.US/CABLOFIL