FASTENERS BEAM CLAMPS Structural beams and posts in commercial and industrial buildings are a natural anchor point for cable pathways. Our beam clamp product line includes clamps for every cable attachment and hanging problem with cast and welded steel bodies that can support threaded rod or attach trays directly to beams. FUNCTION Commercial Industrial CAPACITY RANGE * Beam flanges from 1/8" to 1/2" thick * Threaded rod from 1/4" to 3/4" * Channel from 13/16" to 3-1/4" CABLE CLAMPS Cable clamps are made of the highest quality spring steel to support cabling from drop wires, directly to studs or directly to structures. Each cable clamp is designed to secure cabling without additional hardware. All cable clamps are available in pre-galvanized finishes for interior use. FUNCTION Cable-to-Drop Wire Cable-to-Structure CAPACITY RANGE * Beam Flanges from 1/16" to 1/2" thick * Drop wire sizes from #8 to #12 * MC sizes from 14-2 to 8-3 CONDUIT CLAMPS Most of our conduit clamps feature a pre-galvanized, spring steel design with self-locking jaws that secure conduit to strut, metal studs, I-beams and drop wires. Many of those clamps hammer on with the need for additional hardware. Other clamps feature a setscrew and saddle to attach conduit to cable trays. Every Legrand clamp is designed to install with speed and efficiency and are boxed in quantity. FUNCTION * EMT sizes from 1/2" to 4" * Conduit sizes from 1/2 " to 4" * Beam flanges from 1/8" to 1/2" thick * T-Bar thicknesses - 5/16" and 9/16" * Rod thickness - 1/4" to 3/8" CLAMPS Conduit-to-Bolt Mount Conduit-to-Strut Conduit-to-Structure Conduit-to-Sheet Metal Stud Conduit-to-Drop Wire/ATR Conduit-to-T-Bar Attachment CAPACITY RANGE D.9 WWW.LEGRAND.US/CABLOFILhttp://WWW.LEGRAND.US/CABLOFIL