CLADDING Undercut Anchor Compatible Cladding Systems Features: * Monarch is able to custom punch our MFSTR-050 and MFSTR-1125 mounting systems to be compatible with undercut anchors. * Undercut anchors, such as the Keil Undercut Facade anchors can have centrical pull fracture loads of more than 750 pounds*, allowing for the secure attachment of Cladding Panels when properly installed. TAKTL Panel Installation * Undercut anchors have been utilized with TAKTL panels, GFRC panels, high-pressure laminate, terracotta, and stone. *Fracture loads vary widely depending upon the material Drill "Undercut" Finished Hole Insert Anchor Insert Bolt Undercut Anchor by Keil 3mm Washer Required 1/4"-20 Hex Bolt for minor height adjustments MFSTR-050 2" Clip MFSTR-1125 2" Clip Panel Keil Undercut Anchor w/ Bolt 3mm Washer Required Panel 2.038 CL Anchor Keil Undercut Anchor w/ Bolt MFSTR-050 Continuous Length MFSTR-1125 Continuous Length MFSTR-050 1/2" Cavity from Wall Custom Punched for Undercut Anchor MFSTR-1125 1 1/8" Cavity from Wall Custom Punched for Undercut Anchor - 43 - www.monarchmetal.com (631)750-3000http://www.monarchmetal.com http://www.monarchmetal.com