20 1 8 C A PA B I LITI E S G U I D E SPECIAL ADVERTISING SECTION How the team at Radius HDD engineered A Game Changer virtually eliminating down time between boring and reaming. Just like the "pull back adapter" before it, the Radius team has worked with a number of small bore contractors to develop the new patent pending Over-Bit Reamer. And it's a game changer. Developed specifically for 7K to 25K HDD rigs and used for multi-duct fiber and utility bores. The Radius Over-Bit Reamer easily attaches to your existing rock bit without breaking a single connection. C The average change time is under 1 minute. M Attaching the Radius Over-Bit Reamer is simple: Y CM MY CY CMY K debris from the Radius Rock Bit 1 Wash and place into Over-Bit Reamer. 2 Clamp on the Over-Bit Reamer. Since the reamer simply installs over your Radius Rock Bit, the required exit pit size is minimal with no need to disconnect or even expose the sonde housing and lead rod, allowing you to monitor your pull back. The Over-Bit Reamer is perfect for fiber projects in crowded easements. and tighten one hex bolt. 3 Insert It's seriously fast. Machined from heat treated alloy the Over-Bit Reamer is durable enough to survive even the toughest pull back conditions. The integrated pulleye will adapt to any swivel or pulling shackle while the rear taper design allows for easy push backs and swabbing. The Over-Bit Reamer body is designed with hardfacing and spiraled flutes for optimum suspension and removal of cuttings. The internal cavity directs fluid flow through the bit to both the front and rear of the reamer to aid in lubrication for product pull in. tools.radiushdd.com/over-bit 46 OCTOBER 2018 | UConOnline.com 888-770-7601http://tools.radiushdd.com/over-bit http://www.UConOnline.com