3D Printing Flyer - June 2024 - Email - 9

SAVE 10%
3D PRINTING RESIN
50
SAVE $
DENTCA Crown & Bridge
3D Printable Resin
DENTCA Denture Base
II 3D Printable Resin
DENTCA
An FDA-cleared, biocompatible, and
photocurable material. Performance and
strength are the same as conventional
acrylic. To obtain the guaranteed results,
this resin is to be used in conjunction
with DENTCA Denture Teeth Resin for
manufacturing 100% 3D-printed, removable
dentures. Available only in 1 Kg.
Specifications Before Curing:
Viscosity at 25+/-0.5°C: >1000 cps and
<2000 cps
Density: >1.05 Gm./cm3
and <1.2 Gm./cm3
Specifications After Curing:
Density: >1.15 Gm./cm3
and <1.25 Gm./cm3
Flexural strength: >65 MPa
Flexural modulus: >2000 MPa
Degree of conversion: > 70%
Resin .................................................1 Kg.
Specify:
Light Pink (142-6245) Dark Pink
314.99
(142-6247)
Red Pink (142-6246) Original Pink (142-6244)
SAVE $
50
DENTCA
An FDA-cleared, biocompatible,
and photocurable material intended for
manufacturing temporary crown-and-bridge
restorations. Performance and strength are
the same as conventional acrylic. Fabricating
temporary crowns or bridges with this resin
requires digital models, a stereolithographic
additive printer, and curing light equipment.
Specifications Before Curing:
Viscosity at 25+/-0.5°C: >1000 cps and
<2000 cps
Density: >1.05 Gm./cm3
and <1.2 Gm./cm3
Specifications After Curing:
Density: >1.15 Gm./cm3
and <1.25 Gm./cm3
Flexural strength: >50 MPa
Degree of conversion: >70%
Resin.................................................1 Kg.
Specify:
A1
A2
A3
A3.5
(142-6219)
(142-6221)
(142-6222)
(142-6223)
B1
B2
BL1
(142-6224)
(142-6225)
(142-6226)
NOTE: Shades may not exactly match the VITA®
shade guide; it is
highly recommended to buy Dentca's shade guide first to check
the colors.
SAVE 15%
449.99
DENTCA Denture Teeth
3D Printable Resin
DENTCA
An FDA-cleared, biocompatible, and
photocurable material. Performance and
strength are the same as conventional acrylic.
To obtain the guaranteed results, this resin
is to be used in conjunction with DENTCA
Denture Base II resin for manufacturing 100%
3D-printed, removable dentures. Available
only in 1 Kg.
Specifications Before Curing:
Viscosity at 25+/-0.5°C: >1000 cps and
<2000 cps
Density: >1.05 Gm./cm3
and <1.2 Gm./cm3
Specifications After Curing:
Density: >1.15 Gm./cm3
and <1.25 Gm./cm3
Flexural strength: >50 MPa
Degree of conversion: >70%
Resin .................................................1 Kg.
Specify:
A1
A2
A3
A3.5
(142-6235)
(142-6236)
(142-6237)
(142-6239)
B1
B2
BL1
(142-6240)
(142-6241)
(142-6242)
NOTE: Shades may not exactly match the VITA®
shade guide; it is
highly recommended to buy Dentca's shade guide first to check
the colors.
349.99
For Permanent, Printable Denture Teeth
Flexcera™
Smile Ultra+
DESKTOP HEALTH
A next-generation, hybrid nanoceramic resin
cleared for a wide range of permanent and
temporary dental restorations. High fracture
resistance. Offers moisture resistance to
prevent staining or discoloration. An overall
natural aesthetic that offers lifelike tooth
translucency and a natural-looking smile.
Compatible and validated exclusively for
use with EnvisionTEC™
3D printers. An FDA
510(k)-cleared, Class 2 medical device.
1 Kg. System...................................... Ea.
Specify:
A1
A2
A3
(220-0333)
(220-0334)
(220-0335)
Specify:
A1
A2
A3
(220-0340)
(220-0361)
(220-0363)
A3.5
B1
Bleach
A3.5
BL
(220-0336)
(220-0337)
(220-0339)
0.5 Kg. System..................................Ea.
(220-0362)
(220-0360)
381.99
594.99
USE PROMO CODE SDQ WHEN ORDERING
9
3D Printing Flyer - June 2024 - Email

Table of Contents for the Digital Edition of 3D Printing Flyer - June 2024 - Email
