EXCLUSIVELY FOR YOU Enclosed Sample*& Super Savings for a Limited Time! VP MIX HP MAX HYDRO IMPRESSION MATERIAL Achieve Maximum Detail With Instant Hydrophilicity. TM BUY 3 GET 2 PROMO CODE: ADP SH IP P E D WI T H ORD E R OF THE SAME, OFFER VAL ID FROM 11/5/23-2/29/24 *Enclosed sample type may vary Why Hydrophilicity Matters for Impression Materials * Can easily flow and be applied in moist areas * Helps create accurate impressions in the presence of moisture * Reduces the chances of air entrapment in the impression Directions for Use Instructions for Cartridge Viscosities: 1. Load the cartridge into the cartridge dispensing gun. 2. Remove cartridge closure and discard. 3. Before applying the mixing tip, extrude impression material until it exits both chambers at the same rate. 4. Attach the mixing tip on the cartridge and squeeze the dispenser to extrude the required amount of material directly onto the prepared tooth or into an impression tray or delivery syringe. 5. Leave the filled mixing tip on the cartridge after use. 6. Before using the cartridge again, remove and discard the used mixing tip. Before re-applying another mixing tip, be sure to extrude material so the product is exiting both chambers at the same rate. 7. Attach a fresh mixing tip and proceed as usual. For more information, visit HenryScheinDental.com/HSBimpressionhttp://www.HenryScheinDental.com/HSBimpression