2023/2024 Equipment Catalog - 85

CAD/CAM TECHNOLOGY
MILLING BLOCKS
CELTRA®
Duo Blocks
Dentsply Sirona
A high-strength, glass-ceramic, CAD/CAM block made of zirconia-reinforced lithium
silicate (ZLS). Provides exquisite aesthetics and exceptional strength. Indicated for
single-unit posterior and anterior crowns, inlays, onlays, and veneers.
*Available for CEREC®
CEREC®
.
MTL Zirconia Blocks
Dentsply Sirona
CEREC®
MTL Zirconia is an esthetic zirconia block that provides
strong, precise restorations that are natural looking:
* High Esthetics - natural Multi Transitional Layer with high
shade match.
* High Strength - greater than 850 MPa enable less reduction
of the natural tooth.
* Fast Zirconia Workflow - most efficient when using the
CEREC Primemill & CEREC SpeedFire.
* Easy Workflow - time saving and efficient.
CEREC®
Zirconia+
Dentsply Sirona
Preshaded, translucent, full-contour, zirconium-oxide block.
Flexural strength of >900 MPa. Material is milled in an enlarged
form, allowing for more detailed anatomy in the milling process.
Processed in the partially sintered state and densely sintered
after milling. Subsequent glaze firing gives the restoration
a high-gloss finish. Has precise edges, highly detailed
occlusal surfaces, and no risk of chipping. Can be cemented
conventionally. Suitable for individual crowns as well as small
bridges and can be processed in thin walls.
Furnace required postmilling.
*Available for CEREC®
.
mono
medi
C14
CERASMART™
GC America
Blocks
Force-absorbing, flexible nanoceramic CAD/CAM material. High, 3-point
flexural strength of 231 MPa and a biaxial strength of 238 MPa. Combines
the best characteristics of a high-strength ceramic and a composite.
Provides the highest degree of flexibility, strength, and breaking energy, as
well as superior reliability, aesthetics, milling accuracy, and self-polishing
properties. Additionally, it offers properties almost identical to those of
natural teeth. Can be used for posterior, anterior, inlay, onlay, and implant
restorations. Also enables only the slightest amount of tooth reduction for
minimally invasive restorations. No furnace required.
HT (High Translucency)
For replacing enamel. Use in
cases of inlays, onlays, veneers,
partials, and full crowns.
LT (Low Translucency)
For replacing dentin and enamel
structures. Used to mask discolored
preparations, particulary crowns.
Initial LiSi Block
GC America
Fully crystallized lithium disilicate CAD/
CAM material. Proprietary High Density
Micronization (HDM) technology offers
high wear resistance, smooth margins,
and esthetic results. Bi-axial flexural
strength of 400 MPa. Indicated for
posterior, anterior, crowns, inlays, and
onlays. Reduced process time: Just mill,
polish, and place. No furnace required.
12
14
14L
*Available for CEREC®
and Planmeca PlanMill®
.
Contact Your Local Henry Schein Consultant or Specialist For More Information.
85
2023/2024 Equipment Catalog

Table of Contents for the Digital Edition of 2023/2024 Equipment Catalog
