IEEE Power Electronics Magazine - June 2021 - 69

award by the Industrial Power Converter Committee at
ECCE 2012. In addition, he received the 2017 IEEE PELS
Sustainable Energy Systems Technical Achievement Award
and the 2018 IEEE-IES Mittelmann Achievement Award.
References
[1] M. Crittenden, " Ultralight batteries for electric airplanes, " IEEE Spectr.,
vol. 57, no. 9, pp. 44-49, 2020. doi: 10.1109/MSPEC.2020.9173903.
[2] X. Zuo, J. Zhu, P. Müller-Buschbaum, and Y.-J. Cheng, " Silicon based
lithium-ion battery anodes: A chronicle perspective review, " Nano Energy,
vol. 31, pp. 113-143, 2017. doi: 10.1016/j.nanoen.2016.11.013.
[3] C. E. L. Foss et al., " Anodes for li-ion batteries prepared from microcrystalline
silicon and enabled by binder's chemistry and pseudo-self-healing, "
Sci. Rep., vol. 10, no. 1, p. 13,193, 2020. doi: 10.1038/s41598-020-70001-5.
[4] X. Wu et al., " Safety issues in lithium ion batteries: Materials and
cell design, " Front. Energ. Res., vol. 7, p. 96, 2019. doi: 10.3389/fenrg.
2019.00065.
[5] N. Nitta, F. Wu, J. T. Lee, and G. Yushin, " Li-ion battery materials: Present
and future, " Mater. Today, vol. 18, no. 5, pp. 252-264, 2015. doi: 10.1016/
j.mattod.2014.10.040.
[6] O. Perez-Diaz, E. Quiroga-Gonzalez, S. Hansen, N. R. Silva-Gonzalez, J.
Carstensen, and R. Adelung, " Fabrication of silicon microwires by a combination
of chemical etching steps and their analysis as anode material
in li-ion batteries, " Mater. Technol., vol. 34, no. 13, pp. 785-791, 2019. doi:
10.1080/10667857.2019.1629059.
[7] M. Ge, X. Fang, J. Rong, and C. Zhou, " Review of porous silicon preparation
and its application for lithium-ion battery anodes, " Nanotechnology,
vol. 24, no. 42, p. 422001, 2013. doi: 10.1088/0957-4484/24/42/422001.
[8] S. Hansen, E. Quiroga-González, J. Carstensen, R. Adelung, and H. Föll,
" Size-dependent physicochemical and mechanical interactions in battery
paste anodes of Si-microwires revealed by fast-Fourier-transform impedance
spectroscopy, " J. Power Sources, vol. 349, pp. 1-10, 2017. doi: 10.1016/
j.jpowsour.2017.03.025.
[9] T-w. Kwon, J. W. Choi, and A. Coskun, " The emerging era of supramolecular
polymeric binders in silicon anodes, " Chem. Soc. Rev., vol. 47, no. 6,
pp. 2145-2164, 2018. doi: 10.1039/C7CS00858A.
[10] E. Quiroga-González, J. Carstensen, and H. Föll, " Optimal conditions
for fast charging and long cycling stability of silicon microwire anodes for
lithium ion batteries, and comparison with the performance of other si
anode concepts, " Energies, vol. 6, no. 10, pp. 5145-5156, 2013. doi: 10.3390/
en6105145.
[11] S. Noehren, E. Quiroga-González, J. Carstensen, and H. Foell, " Electrochemical
fabrication and characterization of silicon microwire anodes for li
ion batteries, " J. Electrochem. Soc., vol. 163, no. 3, pp. A373-A379, Dec. 2015.
doi: 10.1149/2.0111603jes.
[12] A. Wang, S. Kadam, H. Li, S. Shi, and Y. Qi, " Review on modeling of the
anode solid electrolyte interphase (SEI) for lithium-ion batteries, " npj Comput.
Mater., vol. 4, no. 1, p. 359, 2018. doi: 10.1038/s41524-018-0064-0.
[13] S. Hansen, S. Shree, G. Neubüser, J. Carstensen, L. Kienle, and R. Adelung,
" Corset-like solid electrolyte interface for fast charging of silicon wire
anodes, " J. Power Sources, vol. 381, pp. 8-17, 2018. doi: 10.1016/j.jpowsour
.2018.01.085.
[14] E. Quiroga-González, J. Carstensen, and H. Föll, " Structural and electrochemical
investigation during the first charging cycles of silicon microwire
array anodes for high capacity lithium ion batteries, " Materials (Basel, Switzerland),
vol. 6, no. 2, pp. 626-636, 2013. doi: 10.3390/ma6020626.
[15] S. Nöhren, E. Quiroga-Gonzalez, and H. Foll, " Dependence of the
lithiation/delithiation potentials of silicon microwire anodes on their state
of charge and sizes, " ECS Trans., vol. 64, no. 23, pp. 1-10, Apr. 2015. doi:
10.1149/06423.0001ecst.
[16] T. Kim, W. Qiao, and L. Qu, " A multicell battery system design for electric
and plug-in hybrid electric vehicles, " in Proc. IEEE Int. Electr. Veh.
Conf., 2012, pp. 1-7.
[17] M. Andresen, K. Ma, G. Buticchi, J. Falck, F. Blaabjerg, and M. Liserre,
" Junction temperature control for more reliable power electronics, " IEEE
Trans. Power Electron., vol. 33, no. 1, pp. 765-776, 2018. doi: 10.1109/
TPEL.2017.2665697.
[18] S. Qin, Y. Lei, C. Barth, W. Liu, and R. C. N. Pilawa-Podgurski, " A high
power density series-stacked energy buffer for power pulsation decoupling
in single-phase converters, " IEEE Trans. Power Electron., vol. 32, no. 6,
pp. 4905-4924, 2017. doi: 10.1109/TPEL.2016.2601309.
[19] V. M. Iyer, S. Gulur, S. Bhattacharya, and R. Ramabhadran, " A partial
power converter interface for battery energy storage integration with a dc
microgrid, " in Proc. IEEE Energy Conversion Congr. Expo. (ECCE), 2019,
pp. 5783-5790. doi: 10.1109/ECCE.2019.8912590.
[20] F. Hoffmann, J. Lafrenz, M. Liserre, and N. Vazquez, " Isolated multiport
converter as cost efficient solution for dc-fast charger of electric vehicle, "
in Proc. IECON 2019 - 45th Annu. Conf. IEEE Ind. Electron. Soc., 2019,
vol. 1, pp. 4905-4910. doi: 10.1109/IECON.2019.8927087.
[21] M. Shousha, A. Prodi´c, V. Marten, and J. Milios, " Design and implementation
of assisting converter-based integrated battery management
system for electromobility applications, " IEEE J. Emerg. Sel.
Topics Power Electron., vol. 6, no. 2, pp. 825-842, 2018. doi: 10.1109/
JESTPE.2017.2736166.
[22] Y. Ko, V. Raveendran, M. Andresen, and M. Liserre, " Discontinuous
modulation-based power routing for modular smart transformers, " in Proc.
IEEE Energy Conversion Congr. and Expo. (ECCE), 2018, pp. 1084-1090.
doi: 10.1109/ECCE.2018.8558198.
[23] F. Hahn, M. Andresen, and M. Liserre, " Enhanced current capability
for modular multilevel converters by a combined sorting algorithm for
capacitor voltages and semiconductor losses, " in Proc. IEEE Appl. Power
Electron. Conf. and Expo. (APEC), 2019, pp. 3071-3077. doi: 10.1109/
APEC.2019.8722065.
[24] N. Nitta, F. Wu, J. T. Lee, and G. Yushin, " Li-ion battery materials: Present
and future, " Mater. Today, vol. 18, no. 5, pp. 252-264, 2015. doi: 10.1016/j.mattod.2014.10.040.
[25]
T. Waldmann, B.
I. Hogg, and M. Wohlfahrt-Mehrens, " Li plating
as unwanted side reaction in commercial Li-ion cells - A review, "
J. Power Sources, vol. 384, pp. 107-124, 2018. doi: 10.1016/j.jpowsour.
2018.02.063.
[26] A. Tomaszewska et al., " Lithium-ion battery fast charging: A review, "
eTransportation, vol. 1, p. 100011, 2019. doi: 10.1016/j.etran.2019.100011.
[27] M. Wild et al., " Lithium sulfur batteries: A mechanistic review, " Energy
Environ. Sci., vol. 8, no. 12, pp. 3477-3494, 2015. doi: 10.1039/C5EE01388G.
[28] K. Zhu et al., " How far away are lithium-sulfur batteries from commercialization? "
Front. Energy Res., vol. 7, 2019. doi: 10.3389/fenrg.2019.00123.
June 2021 z IEEE POWER ELECTRONICS MAGAZINE 69
IEEE Power Electronics Magazine - June 2021

Table of Contents for the Digital Edition of IEEE Power Electronics Magazine - June 2021
