IEEE Robotics & Automation Magazine - June 2020 - 175

[9] W. Kim, J. Lee, L. Peternel, N. Tsagarakis, and
A. Ajoudani, "Anticipatory robot assistance for the
prevention of human static joint overloading in
human-robot collaboration," IEEE Robot. Autom.
Lett., vol. 3, no. 1, pp. 68-75, 2018. doi: 10.1109/
LRA.2017.2729666.
[10] M. Lorenzini, W. Kim, E. De Momi, and A.
Ajoudani, "A synergistic approach to the real-time
estimation of the feet ground reaction forces and
centres of pressure in humans with application to
human-robot collaboration," IEEE Robot. Autom.
Lett., vol. 3, no. 4, pp. 3654-3661 2018. doi:
10.1109/LRA.2018.2855802.
[11] G. Durandau, D. Farina, and M. Sartori,
"Robust real-time musculoskeletal modeling
driven by electromyograms," IEEE Trans. Biomed.
Eng., vol. 65, no. 3, pp. 556-564, 2018. doi: 10.1109/
TBME.2017.2704085.
[12] S. Song and H. Geyer, "A neural circuitry that
emphasizes spinal feedback generates diverse
behaviours of human locomotion," J. Physiol., vol.
593, no.  16, pp. 3493-3511, 2015. doi: 10.1113/
JP270228.
[13] S. J. De Serres and T. E. Milner, "Wrist muscle
activation patterns and stiffness associated with
stable and unstable mechanical loads," Exp. Brain
Res., vol. 86, no. 2, pp. 451-458, Sept. 1991. doi:
10.1007/BF00228972.
[14] M. Sartori, D. G. Llyod, and D. Farina, "Neural data-driven musculoskeletal modeling for personalized neurorehabilitation technologies," IEEE
Trans. Biomed. Eng., vol. 63, no. 5, pp. 879-893,
2016. doi: 10.1109/TBME.2016.2538296.
[15] M. Sartori, U. Ş. Yavuz, and D. Farina, "In
vivo neuromechanics: Decoding causal motor neuron behavior with resulting musculoskeletal function," Sci. Rep., vol. 7, no. 1, p. 13465, 2017. doi:
10.1038/s41598-017-13766-6.
[16] G. Durandau et al., "Voluntary control of
wearable robotic exoskeletons by patients with
paresis via neuromechanical modeling," J. Neuroeng. Rehabil., vol. 16, p. 91, 2019. doi: 10.1186/
s12984-019-0559-z.
[17] P. J. Kieliba et al., "Comparison of three hand
pose reconstruction algorithms using inertial and
magnetic measurement units," in Proc. 2018 IEEERAS 18th Int. Conf. Humanoid Robots (Humanoids),
pp. 1-9. doi: 10.1109/HUMANOIDS.2018.8624929.
[18] S. Ciotti, E. Battaglia, N. Carbonaro, A. Bicchi, A. Tognetti, and M. Bianchi, "A synergy-based
optimally designed sensing glove for functional
grasp recognition," Sensors, vol. 16, no. 6, p. E811,
2016. doi: 10.3390/s16060811.
[19] S. Jain, A. Farshchiansadegh, A. Broad, F.
Abdollahi, F. Mussa-Ivaldi, and B. Argall, "Assistive robotic manipulation through shared auton-

omy and a body-machine interface," in Proc. 2015
IEEE Int. Conf. Rehabilitation Robotics (ICORR),
pp. 526-531. doi: 10.1109/ICORR.2015.7281253.
[20] M. Aggravi, G. Salvietti, and D. Prattichizzo,
"Haptic wrist guidance using vibrations for
Human-Robot teams," in Proc. 2016 25th IEEE Int.
Symp. Robot and Human Interactive Communication
(RO-MAN), pp. 113-118. doi: 10.1109/ROMAN.
2016.7745098.
[21] M. Bianchi, "A fabric-based approach for
wearable haptics," Electronics, vol. 5, no. 4, p. 44,
2016. doi: 10.3390/electronics5030044.
[22] V. H. Andaluz et al., "Transparency of a bilateral tele-operation scheme of a mobile manipulator
robot," in Proc. Int. Conf. Augmented Reality, Virtual Reality and Computer Graphics, 2016,
pp. 228-245. doi: 10.1007/978-3-319-40621-3_18.
[23] L. Johannsmeier and S. Haddadin, "A hierarchical human-robot interaction-planning framework for task allocation in collaborative industrial
assembly processes," IEEE Robot. Autom. Lett., vol. 2,
no. 1, pp.  41-48, 2017. doi: 10.1109/LRA.2016.
2535907.
[24] F. Chen, K. Sekiyama, F. Cannella, and T.
Fukuda, "Optimal subtask allocation for human
and robot collaboration within hybrid assembly system," IEEE Trans. Autom. Sci. Eng., vol. 11, no. 4, pp.
1065-1075, 2014. doi: 10.1109/TASE.2013.
2274099.
[25] P. Tsarouchi, G. Michalos, S. Makris, T. Athanasatos, K. Dimoulas, and G. Chryssolouris, "On a
human-robot workplace design and task allocation
system," Int. J. Comput. Integr. Manuf., vol. 30, no. 12,
pp. 1272-1279, 2017. doi: 10.1080/0951192X.
2017.1307524.
[26] A. Roncone, O. Mangin, and B. Scassellati,
"Transparent role assignment and task allocation
in human robot collaboration," in Proc. 2017 IEEE
Int. Conf. Robotics and Automation (ICRA),
pp. 1014-1021. doi: 10.1109/ICRA.2017.7989122.
[27] M. S. Malvankar-Mehta and S. S. Mehta, "Optimal task allocation in multi-human multi-robot
interaction," Optim. Lett., vol. 9, no. 8, pp. 1787-
1803, 2015. doi: 10.1007/s11590-015-0890-7.
[28] I. E. Makrini, K. Merckaert, J. De Winter, D.
Lefeber, and B. Vanderborght, "Task allocation for
improved ergonomics in human-robot collaborative assembly," Interact. Stud., vol. 20, no. 1,
pp. 102-133, 2019. doi: 10.1075/is.18018.mak.
[29] E. Lamon, A. De Franco, L. Peternel, and A.
Ajoudani, "A capability-aware role allocation
approach to industrial assembly tasks," IEEE
Robot. Autom. Lett., vol. 4, no. 4, pp. 3378-3385,
2019. doi: 10.1109/LRA.2019.2926963.
[30] O. Khatib, "Real-time obstacle avoidance for
manipulators and mobile robots," Int. J. Robot.

Res., vol. 5, no. 1, pp. 90-98, 1986. doi: 10.1177/
027836498600500106.
[31] L. Zaccarian and A. R. Teel, Modern Anti-windup
Synthesis: Control Augmentation for Actuator Saturation. Princeton, NJ: Princeton Univ. Press, 2011.
[32] K. Merckaert, B. Vanderborght, M. Nicotra,
and E. Garone, "Constrained control of robotic
manipulators using the explicit reference governor," in Proc. 2018 /RSJ Int. Conf. Intelligent Robots
and Systems (IROS), pp. 5155-5162. doi: 10.1109/
IROS.2018.8593857.
[33] D. Meister, "Behavioural Analysis and Measurement Methods," Chichester, UK: Wiley, 1985.
[34] A. Dearden, M. Harrison, and P. Wright,
"Allocation of function: Scenarios, context and the
economics of effort," Int. J. Hum.-Comput. Stud.,
vol. 52, no. 2, pp. 289-318, 2000. doi: 10.1006/
ijhc.1999.0290.
[35] T. Cox Jr., "Toward the measurement of manufacturing f lexibility," Prod. Invent. Manag. J.,
vol. 30, no. 1, pp. 68-72, 1989.
[36] A. Cherubini, R. Passama, A. Crosnier, A.
Lasnier, and P. Fraisse, "Collaborative manufacturing with physical human-robot interaction,"
Robot. Comput.-Integr. Manuf., vol. 40, pp. 1-13,
Aug. 2016. doi: 10.1016/j.rcim.2015.12.007.
[37] J. T. C. Tan, F. Duan, Y. Zhang, K. Watanabe,
R. Kato, and T. Arai, "Human-robot collaboration
in cellular manufacturing: Design and development," in Proc. 2009 IEEE/RSJ Int. Conf. Intelligent
Robots and Systems, pp. 29-34. doi: 10.1109/
IROS.2009.5354155.
[38] A. Cherubini et al., "A collaborative robot for
the factory of the future: Bazar," Int. J. Adv. Manuf.
Technol., vol. 105, no. 9, pp. 3643-3659, 2019. doi:
10.1007/s00170-019-03806-y.
[39] B. Navarro, A. Fonte, P. Fraisse, G. Poisson, and
A. Cherubini, "In pursuit of safety: An open-source
library for physical human-robot interaction," IEEE
Robot. Autom. Mag, vol. 25, no. 2, pp. 39-50, 2018.
doi: 10.1109/MRA.2018.2810098.
[40] Y. Wu, P. Balatti, M. Lorenzini, F. Zhao, W. Kim,
and A. Ajoudani, "A teleoperation interface for locomanipulation control of mobile collaborative
robotic assistant," IEEE Robot. Autom. Lett., vol. 4,
no. 4, pp. 3593-3600, 2019. doi: 10.1109/LRA.2019.
2928757.
[41] K. Wansoo, M. Lorenzini, B. Pietro, W. Yuqiang, and A. Ajoudani, "Towards ergonomic control of collaborative effort in multi-human
mobile-robot teams," in Proc. 2019 IEEE/RSJ Int.
Conf. Intelligent Robots and Systems, pp. 3005-
3011. doi: 10.1109/IROS40897.2019.8967628.
[42] P. H. Rosen and S. Wischniewski, "Task
design in human-robot-interaction scenarios:
Challenges from a human factors perspective,"

JUNE 2020

*

IEEE ROBOTICS & AUTOMATION MAGAZINE

*

175
IEEE Robotics & Automation Magazine - June 2020

Table of Contents for the Digital Edition of IEEE Robotics & Automation Magazine - June 2020
