IEEE Robotics & Automation Magazine - September 2022 - 105

[123] H. Jabbari Asl and F. Janabi-Sharifi, " Adaptive neural network
control of cable-driven parallel robots with input saturation, " Eng.
Appl. Artif. Intell., vol. 65, pp. 252-260, Oct. 2017, doi: 10.1016/j.
engappai.2017.05.011.
[124] H. Asl and J. Yoon, " Stable assist-as-needed controller design for
a planar cable-driven robotic system, " Int. J. Control, Automat. Syst.,
vol. 15, no. 6, pp. 2871-2882, Dec. 2017, doi: 10.1007/s12555-016-0492-x.
[125] J. Yang, H. Su, Z. Li, D. Ao, and R. Song, " Adaptive control with a
fuzzy tuner for cable-based rehabilitation robot, " Int. J. Control, Automat.
Syst., vol. 14, no. 3, pp. 865-875, Jun. 2016, doi: 10.1007/s12555-015-0049-4.
[126] J. Lamaury and M. Gouttefarde, " Control of a large redundantly
actuated cable-suspended parallel robot, " in Proc. 30th IEEE Int. Conf.
Robot. Automat., May 2013, pp. 4644-4649, doi: 10.1109/ICRA.2013.6631240.
[127] H. D. Taghirad and Y. B. Bedoustani, " An analytic-iterative redundancy
resolution scheme for cable-driven redundant parallel manipulators, "
IEEE Trans. Robot., vol. 27, no. 6, pp. 1137-1143, Dec. 2011, doi:
10.1109/TRO.2011.2163433.
[128] C. Gosselin and M. Grenier, " On the determination of the force
distribution in overconstrained cable-driven parallel mechanisms, "
Meccanica (Milan), vol. 46, no. 1, pp. 3-15, Feb. 2011, doi: 10.1007/s11012
-010-9369-x.
[129] A. Pott, T. Bruckmann, and L. Mikelsons, " Closed-form force distribution
for parallel wire robots, " in Computational Kinematics, A.
Kecskeméthy and A. Müller, Eds. Cham, Switzerland: Springer-Verlag,
2009, pp. 25-34. [Online]. Available: http://link.springer.com/10.1007/978
-3-642-01947-0_4
[130] E. Ueland, T. Sauder, and R. Skjetne, " Optimal force allocation for
overconstrained cable-driven parallel robots: continuously differentiable
solutions with assessment of computational efficiency, " IEEE Trans.
Robot., vol. 37, no. 2, pp. 659-666, Apr. 2021, doi: 10.1109/TRO.2020.3020747.
[131] R. J. Caverly and J. R. Forbes, " Flexible cable-driven parallel
manipulator control: maintaining positive cable tensions, " IEEE Trans.
Control Syst. Technol., vol. 26, no. 5, pp. 1874-1883, Sep. 2018, doi:
10.1109/TCST.2017.2728007.
[132] J. C. Santos, A. Chemori, and M. Gouttefarde, " Redundancy resolution
integrated model predictive control of CDPRs: Concept, implementation
and experiments, " in Proc. IEEE Int. Conf. Robot. Automat.
(ICRA), May 2020, pp. 3889-3895, doi: 10.1109/ICRA40945.2020.9197271.
[133] A. Ameri, A. Molaei, and M. A. Khosravi, " Nonlinear observer-based
tension distribution for cable-driven parallel robots, " in Proc. Int. Conf.
Cable-Driven Parallel Robots. Cham, Switzerland, Jun. 2021, pp. 105-116.
[134] X. Tang and Z. Shao, " Trajectory generation and tracking control
of a multi-level hybrid support manipulator in FAST, " Mechatronics,
vol. 23, no. 8, pp. 1113-1122, Dec. 2013, doi: 10.1016/j.mechatronics.
2013.09.002.
[135] M. Korayem, M. Yousefzadeh, and S. Susany, " Dynamic modeling
and feedback linearization control of wheeled mobile cable-driven
parallel robot considering cable sag, " Arab. J. Sci. Eng., vol. 42, no. 11, pp.
4779-4788, Nov. 2017, doi: 10.1007/s13369-017-2658-0.
[136] Y. X. Su, C. H. Zheng, and B. Y. Duan, " Fuzzy learning tracking of
a parallel cable manipulator for the square kilometre array, " Mechatronics,
vol. 15, no. 6, pp. 731-746, 2005, doi: 10.1016/j.mechatronics.
2004.12.001.
[137] B. Zi, B. Y. Duan, J. L. Du, and H. Bao, " Dynamic modeling and
active control of a cable-suspended parallel robot, " Mechatronics, vol.
18, no. 1, pp. 1-12, 2008, doi: 10.1016/j.mechatronics.2007.09.004.
[138] R. J. Caverly, J. R. Forbes, and D. Mohammadshahi, " Dynamic
modeling and passivity-based control of a single degree of freedom
cable-actuated system, " IEEE Trans. Control Syst. Technol., vol. 23, no. 3,
pp. 898-909, May 2015, doi: 10.1109/TCST.2014.2347807.
[139] R. Babaghasabha, M. Khosravi, and H. Taghirad, " Adaptive robust
control of fully constrained cable robots: Singular perturbation
approach, " Nonlinear Dyn., vol. 85, no. 1, pp. 607-620, Jul. 2016, doi:
10.1007/s11071-016-2710-8.
[140] H. Jamshidifar, S. Khosravani, B. Fidan, and A. Khajepour, " Vibration
decoupled modeling and robust control of redundant cable-driven
parallel robots, " IEEE/ASME Trans. Mechatron., vol. 23, no. 2, pp. 690-
701, Apr. 2018, doi: 10.1109/TMECH.2018.2793578.
[141] F. Najafi and M. Bakhshizadeh, " Development a fuzzy PID controller
for a parallel cable robot with flexible cables, " in Proc. 4th Int.
Conf. Robot. Mechatron. (ICROM), Oct. 2016, pp. 90-97, doi: 10.1109/
ICRoM.2016.7886823.
[142] H. Jamshidifar, M. Rushton, and A. Khajepour, " A reaction-based
stabilizer for nonmodel-based vibration control of cable-driven parallel
robots, " IEEE Trans. Robot., vol. 37, no. 2, pp. 667-674, Apr. 2021, doi:
10.1109/TRO.2020.3031269.
[143] L. Cuvillon, X. Weber, and J. Gangloff, " Modal control for active
vibration damping of cable-driven parallel robots, " J. Mechanisms
Robot., vol. 12, no. 5, Oct. 1, 2020, doi: 10.1115/1.4046434.
[144] F. Ennaiem et al., " Task-based design approach: Development of a
planar cable-driven parallel robot for upper limb rehabilitation, " Appl.
Sci., vol. 11, no. 12, p. 5635, Jun. 2021, doi: 10.3390/app11125635.
[145] L. Zhang, L. Li, Y. Zou, K. Wang, X. Jiang, and H. Ju, " Force control
strategy and bench press experimental research of a cable driven astronaut
rehabilitative training robot, " IEEE Access, vol. 5, pp. 9981-9989,
May 2017, doi: 10.1109/ACCESS.2017.2702188.
[146] T. Zhao, S. Qian, Q. Chen, and Z. Sun, " Design and analysis of a
cable-driven parallel robot for waist rehabilitation, " in Proc. IEEE Int.
Conf. Mechatron., Robot. Automat. (ICMRA), May 2018, pp. 173-178,
doi: 10.1109/ICMRA.2018.8490581.
[147] L. Dovat et al., " HandCARE: A cable-actuated rehabilitation system
to train hand function after stroke, " IEEE Trans. Neural Syst.
Rehabil. Eng., vol. 16, no. 6, pp. 582-591, Dec. 2008, doi: 10.1109/
TNSRE.2008.2010347.
[148] R. Beer, C. Naujokas, B. Bachrach, and D. Mayhew, " Development
and evaluation of a gravity compensated training environment for robotic
rehabilitation of post-stroke reaching, " in Proc. 2nd Biennial IEEE/RASEMBS
Int. Conf. Biomed. Robot. Biomechatron., USA, 2008, pp. 205-210.
[149] A. Alamdari and V. Krovi, " A cable-driven robotic rehabilitation system
for lower-extremity motor therapy, " in Proc. ASME 2015 Int. Design
Eng. Techn. Conf. Comput. Inf. Eng. Conf., USA, Aug. 2, 2015, pp. 1-10.
[150] S. Bennour, M. Harshe, L. Romdhane, and J. Merlet, " A new
experimental set-up based on a parallel cable robot for analysis and
control of human motion, " Comput. Methods Biomech. Biomed. Eng.,
vol. 14, pp. 83-85, Aug. 1, 2011, doi: 10.1080/10255842.2011.592372.
[151] G. Rosati, P. Gallina, and S. Masiero, " Design, implementation and
clinical tests of a wire-based robot for neurorehabilitation, " IEEE
Trans. Neural Syst. Rehabil. Eng., vol. 15, no. 4, pp. 560-569, Dec. 2007,
doi: 10.1109/TNSRE.2007.908560.
[152] H. Vallery et al., " Multidirectional transparent support for overground
gait training, " in Proc. IEEE 13th Int. Conf. Rehab. Robot.
(ICORR), United States, Jun. 2013, pp. 1-7.
SEPTEMBER 2022 * IEEE ROBOTICS & AUTOMATION MAGAZINE *
105
http://link.springer.com/10.1007/978-3-642-01947-0_4 http://link.springer.com/10.1007/978-3-642-01947-0_4
IEEE Robotics & Automation Magazine - September 2022

Table of Contents for the Digital Edition of IEEE Robotics & Automation Magazine - September 2022
