Dealers LP Equipment 2021-23 - 55

INTERNAL, ESV & CONTAINER VALVES
ESV PNEUMATIC CONTROLS
* Closes the liquid and vapor ESV from a convenient remote location.
* Independent closed loop system allows the ESV to be pneumatically charged, but opened
or closed manually or with cable controls to conserve pressurized gas.
* Independent closed loop system will continue to hold pressure and close ESV in an
emergency - even if supply pressure is cut off.
* Any loss of pressure from the control line, such as accidents or the line melting from fire,
automatically shuts down the liquid and vapor ESV.
* ESV must be reset after automatic shutdown.
7LP4073
RegO® Emergency Shut-Off Valves modified for remote pneumatic shutdown operation retain all the operating
features of the standard valves. Once equipped with pneumatic cylinders and then pressurized, the
pneumatic cylinder piston rod disengages from a striker plate, allowing the ESV to be manually opened and
the striker plate to act as a latch and hold the valve open. Release of the control system pressure for any
reason closes the ESV for fail-safe operation.
CAT. NO. MFG. NO.
1LP1582
1LP1962
1LP1947
1LP1946
1LP3374
7LP1026
7LP4073
DESCRIPTION
6016-60D
6016PN-50
7605AP-16
7605AP-15
7605APN-8-A
125V-3-10-22
250V-3-10-21
Cylinder assembly kit to convert 6016 ESV's to pneumatic shutdown
Pneumatic remote shutdown kit, complete with 100' of tubing, fittings, 1 charging valve & 1 remote shutdown valve
1/4 " tubing tee, with nuts
1/8 " NPT X 1/4 " tubing, straight connector
Shutdown valve assembly only
2-way Pneumatic Toggle Valve
3-way Pneumatic Toggle Valve
2 " & 3 " HEAVY DUTY SWING CHECKS WITH FLOW INDICATOR
* Easy to read flow indicator
* Heavy duty spring loaded swing check design
* Resilient synthetic rubber seat disc
* High flow rates with low pressure drop
* May be installed either horizontally or vertically
* 1/4 " F. NPT plugged boss on top of body
* For use with LPG & NH3
This back check valve is designed to provide required back flow protection for the unloading riser in the
bulk plant's transfer area. It is designed specifically for pipeline installation and is suitable for LP-Gas and
Anhydrous Ammonia service. Product flow moves the swing check to the open position, when flow stops the
spring loaded swing check closes.
CAT. NO. MFG. NO. DESCRIPTION
A7616
CAPACITY @ 10 PSI PRESSURE DROP
TBD
1LP3398 A7624
2 " Inlet & Outlet 711 GPM (LPG) - 640 GPM (NH3)
3 " Inlet & Outlet 1325 GPM (LPG) - 1173 GPM (NH3)
Visit us at :: www.dealerslp.com
DON'T SEE WHAT YOU'RE LOOKING FOR? JUST ASK!
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov
55
REGULATORS &
TANK VALVES

https://www.dealerslp.com/WebServices/Home/Start/Search?_FieldName=CatNo&_FieldValue=7LP4073 https://www.dealerslp.com/WebServices/Home/Start/Search?_FieldName=CatNo&_FieldValue=7LP1026 https://www.dealerslp.com/WebServices/Home/Start/Search?_FieldName=CatNo&_FieldValue=7LP4073 https://www.dealerslp.com/WebServices/Home/Start/Search?_FieldName=CatNo&_FieldValue=1LP3398 http://www.dealerslp.com http://www.P65Warnings.ca.gov

Dealers LP Equipment 2021-23

Table of Contents for the Digital Edition of Dealers LP Equipment 2021-23