Section 14 - Tub & Shower Repairs TUB & SHOWER REPAIRS Repairs For Bradley Equa-Flo #478 - Second Generation Furnished From May 1982 to Present Note: When replacing the Double Face Seals, lubricate the top face with a small amount of silicone lubricant reassembling. When assembling cap into valve body, use silicone lubricant on O-Ring to prevent twisting of O-Ring. If silicone lubricant is not available, a slight film of soap may be used. Valves are equipped with Termperature Limit Stop. This Stop can be used to limit temperature of tempered water discharged. To adjust, remove Handle, loosen set screw. Remove Limit Stop and reposition to desired setting. Reposition Limit Stop turning clockwise for cooler setting and counter clockwise for hotter setting. Half step adjustments may be made by removing limit stop(s), turning over and realigning against cap splines. Cat. No. 15119 Gasket Repair Kit: S65-073 Includes: Square Ring: #20521 Qty. 2 O-Ring: Qty. 3 Double Face Seal: Qty. 2 *Included in Stem Assembly Cat. No. 11437 Cartridge Assembly S67-359 Cat. No. 11449 Includes: Cartridge: Qty. 1 Sleeve & Flapper Assembly: Qty. 2 Double Face Seal: Qty. 2 Square Rings 20521: Qty. 2 14-96 PHONE 800-772-2347 FAX 800-991-6275