Faucets - 6-336

Section 6 - Faucets
WILLOUGHBY VALVE ASSEMBLIES
Willoughby Dual Temperature Pneumatic Metering
Valves
Willoughby offers reliable metering performance with adjustable timing from 5-90
seconds. Push buttons - non-removable from the front of the fixture - require less
than 5 lbs. of force to operate. The valve checkstop/strainer is cast brass with
integral mounting lugs. Replaceable stainless steel strainer with optional 0.5 GPM
flow control can be serviced without disturbing the supply line. The connection to
the filler/bubbler/shower head shall be flexible tubing. Water inlet is 1/2 " FPT and
reversible for either top or bottom supply. Valve is easily serviced from the pipe chase.
Recommended operating pressure is 35-70 PSI. Valve will withstand pressures up to
90 PSI. Pneumatic system is self-contained and requires no outside air supply. Fillers,
bubblers, shower heads furnished separately.
Cat.#
28613
28614
OEM
PM2-0.5GPM
PM2-HNFC
Description
Willoughby Dual Temperature, Metering Valve,
0.5 GPM
Willoughby Dual Temperature, Metering Valve,
No Flow Control
Willoughby Retrofit Metering Valves
The Willoughby Retrofit Metering Valve (WRMV) is designed to easily convert single
and/or dual temperature mechanical valve cartridges, pushrods and toggles to state-ofthe-art
pneumatically operated valve assemblies. Existing Willoughby WSC-1, WSC-2
(single and dual temperature mechanical self-closing) and WM- 1, WM-2 (single and
dual temperature mechanical metering) valve cartridges manufactured since 1985 are
directly replaced with WRMV assembly kits to enable use of pneumatic metering.
The WRMV assembly kit consists of stainless steel security push button pump(s), nonhold
open pneumatic metering cartridges with integral pneumatic valve, and a supply
of 1/8 " tubing. Traditional mechanical toggles and pushrod components are completely
eliminated. The valve assembly uses the stainless steel pushbutton(s) to activate a
non-hold open pneumatic metering (5-90 seconds) valve(s). The pushbutton(s) require
less than 5 lbs. force to operate.
Cat.#
28625
28620
OEM
WRMV-2
WRMV-1
Description
Willoughby Dual Temperature, Retrofit Metering
Valve
Willoughby Single Temperature, Retrofit Metering
Valve
Willoughby Dual Temp Lavatory Valve Assembly
The valve assembly shall use pushbuttons and pushrods to directly activate
replaceable self-closing or metering (5-15 seconds) cartridges. Vandalproof stainless
steel pushbuttons and keyed escutcheons shall be non-removable from the front of the
fixture. The valve body shall be cast brass with integral mounting lugs and checkstops.
Replaceable stainless steel strainers and 0.5 GPM flow control shall be serviced
without disturbing the supply lines. The connection to the filler/bubbler shall be flexible
tubing. Water inlets shall be 1/2 " FPT and shall be reversible for either top or bottom
supply. The valve assembly shall be accessible from the pipe chase only. Pushrods
and flexible tubing shall be supplied for walls up to 8 inches thick. Recommended
operating pressure shall be 35-70 psi. Valve shall withstand pressures up to 90 psi.
Cat.#
10553
10552
22582
OEM
ME2-8SHA
SC2-8SHA
SC2
Description
Willoughby Mechanical Metering Dual Temp
Lavatory Valve Assembly (With 10506 Square
Hole ADAptor)
Willoughby Mechanical Self Closing Dual Temp
Lavatory Valve Assembly (With 10506 Square
Hole AdAptor)
Willoughby Mechanical Self Closing Dual Temp
Lavatory Valve Assembly
6-336
PHONE 800-772-2347
FAX 800-991-6275

Faucets

Table of Contents for the Digital Edition of Faucets