Section 6 - Faucets WILLOUGHBY VALVE ASSEMBLIES Willoughby Single Temperature Security Compression Valve Cat.# 37835 OEM WCV1 Description Willoughby Single Temperature Security Compression Valve Willoughby Dual Temperature Security Compression Valve Cat.# 37836 OEM WCV2 Description Willoughby Dual Temperature Security Compression Valve Willoughby Single Temperature Electronic Valve Assembly (Transformer and Controller Sold Separately) Stainless steel buttons on the fixture shall be wired to an appropriate electronic valve control (select from the list of control choices). The vandal-resistant buttons shall be keyed/non-removable from the front of the fixture and shall require less than 5 lbs. of force to operate. The plastic valve checkstop/strainers feature integral mounting points. Replaceable stainless steel strainer, flow control can be serviced without disturbing the supply line. Assembly uses flexible tubing to connect to the filler/bubbler/shower head. Water inlet is 1/2 " MPT and is reversible for either top or bottom supply. A galvanized wall mounting plate is provided, wall anchoring hardware not included. Flexible tubing is supplied for walls up to 8 " thick. Recommended operating pressure shall be 35-70 psi. Valve shall withstand pressures up to 90 psi. A 24 volt AC power supply is required for timer and valve operation. Valve complies with NSF-61 standard. Control: * Pneumatic Timer - 33631 * WUCC-3010 - 37793 * WUSC-2400 - 37972 * WMS II Control - 33632 * Pneutronic Timer - 33631 * WUCC-3010 - 37793 * WUSC-2400 - 37972 * WMS II Control - 33632 Cat.# 33628 33629 OEM E1L1105K0S E1L1105J0S Description Willoughby 0.5 GPM Single Temp. Valve Willoughby 0.5 GPM Single Temp. Valve with Piezo Button 6-338 PHONE 800-772-2347 FAX 800-991-6275