WILLOUGHBY VALVE ASSEMBLIES Section 6 - Faucets Willoughby Single Temperature Shower Valve (Transformer and Controller Sold Separately) Stainless steel buttons on the fixture shall be wired to an appropriate electronic valve control (select from the list of control choices). The vandal-resistant buttons shall be keyed/non-removable from the front of the fixture and shall require less than 5 lbs. of force to operate. The plastic valve checkstop/strainers feature integral mounting points. Replaceable stainless steel strainer. Assembly uses flexible tubing to connect to the filler/bubbler/ shower head. Water inlet is 1/2 " MPT and is reversible for either top or bottom supply. A galvanized wall mounting plate is provided, wall anchoring hardware not included. Flexible tubing is supplied for walls up to 8 " thick. Recommended operating pressure shall be 35-70 psi. Valve shall withstand pressures up to 90 psi. A 24 volt AC power supply is required for timer and valve operation. Valve complies with NSF-61 standard. No Flow Control. Control: * Pneumatic Timer - 33631 * WUCC-3010 - 37793 * WUSC-2400 - 37972 * WMS II Control - 33632 * Pneutronic Timer - 33631 * WUCC-3010 - 37793 * WUSC-2400 - 37972 * WMS II Control - 33632 Cat.# 37709 37710 OEM E1L11XXK0S E1L11XXJ0S Description Willoughby Single Temp. Shower Valve with Standard Push Button Willoughby Single Temp. Shower Valve with Piezo Button Willoughby Single Temperature Electronic Valve (Transformer and Controller Sold Separately) Stainless steel push buttons on the fixture shall be wired to an appropriate electronic valve control (select from the list of control choices). The vandal resistant push buttons shall be keyed/non-removable from the front of the fixture and shall require less than 5 lbs. of force to operate. The plastic valve checkstop/strainers feature integral mounting points. Replaceable stainless steel strainer, flow control can be serviced without disturbing the supply line. Assembly uses flexible tubing to connect to the filler/bubbler/shower head. Water inlet is 1/2 " MPT and is reversible for either top or bottom supply. A galvanized wall mounting plate is provided, wall anchoring hardware not included. Flexible tubing is supplied for walls up to 8 " thick. Recommended operating pressure shall be 35-70 psi. Valve shall withstand pressures up to 90 psi. A 24 volt AC power supply is required for timer and valve operation. Valve complies with NSF-61 standard. Cat.# OEM 43190 E1L1115J0S Description Willoughby Single Temp. Valve with Piezo Button, 1.5 GPM MARK'S PLUMBING PARTS WWW.MARKSPP.COM 6-339http://WWW.MARKSPP.COM