BATHROOM ACCESSORIES Wingit Grab Bars Concealed-Mount and Exposed-Mount Constructed of premium type 304 (18/8) stainless steel with a smooth satin finish. Mounting flanges are 3" in diameter, 3/32" thick, and are heliarcwelded to the tubing. Exposed models have two (2) mounting holes; concealed models have five (5) mounting holes. Snap-on flange covers (concealed models only) are 22 gauge drawn stainless steel, 3" in diameter, 3/8" in height. Provide 11/2" clearance from wall where required. Grab bars support loads in excess of 420 pounds if properly installed and exceed "Safety Rails in Hazardous Locations" criteria as well as barrier-free accessibility guidelines including ADAAG for structural strength. Made in USA. All WingIt ® straight grab bars can be installed with the patented WingIt ® grab bar fastening systems. Exposed-Mount Grab Bars Cat. # 00300 00301 00302 00303 00304 00305 00306 00307 00308 Concealed-Mount Grab Bars OD x Length 1.5" x 12" 1.5" x 16" 1.5" x 18" 1.5" x 24" 1.5" x 30" 1.5" x 32" 1.5" x 36" 1.5" x 42" 1.5" x 48" Cat. # 00310 00311 00312 00313 00314 00315 00316 00317 00318 OD x Length 1.5" x 12" 1.5" x 16" 1.5" x 18" 1.5" x 24" 1.5" x 30" 1.5" x 32" 1.5" x 36" 1.5" x 42" 1.5" x 48" Concealed-Mount Exposed-Mount COLLAPSABLE WATER RETAINERS Collapsable Water Retainers Excellent for keeping your bathroom floor dry. Made from a very durable & pliable rubber. This material easily collapses when a wheelchair or foot steps or rolls over it. All sizes are 1.5 inches high, 1-inch wide, and 13⁄8 inches wide at the base. Comes with an epoxy glue kit. Excellent when used in conjunction with Weighted Shower Curtains. * Installs along shower threshold * Shower curtain butts up against it * Retainer squashes when a wheelchair goes over it * Easy to install (epoxy glue kit included) * An excellent ADA modification for roll-in showers Who uses Collapsible Water Retainers: * Nursing and Retirement Homes * Universities * Hospitals * Military * Schools * Property Managers * Commercial facilities * Commercial and Residential Contractors * Homeowners building an Accessible Bathroom 08046 08047 08048 Tools needed for installation: * Dry cloth (to wipe floor where installation will be) * Silicon tube dispenser (not included) * Utility knife (may have to cut to size) * Install time usually takes approximately 20 minutes * Always allow at least 24 hours for the silicon to dry Cat. # 08046 08047 08048 Size 3' 5' 6' MARK'S PLUMBING PARTS WWW.MARKSPP.COM 9-25http://WWW.MARKSPP.COM