CRESCENT™ SHOWER RODS Crescent™ Shower Rods & Oval Curved Shower Rods These rods help to keep water inside the tub rather than on the floor, and they provide much more room within the showering space. The ends of the rod install 3" into the tub area from where the current straight rod is located, keeping the ends of the tub more enclosed than a straight rod, preventing water from spraying out and onto the floor. The center of the rod bows out past the edge of the tub, providing extra showering space and elbow room. Uses a standard shower curtain. Prevents liability of slips and falls. Comes complete with all hardware needed for installation. Optional wall plate available to cover existing shower rod holes for retrofit applications. Crescent™ Rod Oval Curved Rod * Made of 1" O.D. type 304 stainless steel * Fits or adjusts to all 5' standard or oval tubs * Can be installed with Crescent™ Rod WingIts® * Made of 18/8 stainless steel tubing * Oval profile * Fits or adjusts to all 5' standard or oval tubs; 6' rod also available * Can be installed with Oval Crescent™ Rod WingIts® The Crescent™ Rod is available in different lengths and different arc projections to accommodate your specific spatial needs. The "projection" dimension will vary based on your specific application and whether the rod's length will need to be adjusted. The Crescent™ Rod Cat. # Description 19514 Crescent™ Rod 29624 Crescent™ Rod 29625 Crescent™ Rod 29626 Crescent™ Rod The Oval Crescent™ Rod 26367 Oval Curved Rod 26370 Oval Curved Rod 26371 Oval Curved Rod Cat. # 38582 32971 * Length 5' 5' 5' 5' Projection 4" - 6" 4" - 6" 2" - 4" 2" - 4" Finish Polished Satin Polished Satin Packaged 12 Per Pack 12 Per Pack 12 Per Pack 12 Per Pack 5' 5' 6' 4" - 6" 2" - 4" 5" - 7" Polished Polished Polished 12 Per Pack 12 Per Pack 12 Per Pack Description Pair of chrome end brackets for Crescent Shower Rod Pair of chrome oval curved rod brackets *Projection Dimension Edge of tub / typical rod installation End bracket (included) Crescent™ Rod Wall Plate Cover the existing holes from your straight rod, and mount the Crecent™ Rod in the proper place. Made of type 304 stainless steel. Cat. # Description 29627 Wall Plate Polished 29628 Wall Plate Satin 43/4" Crescent™ Rod WingIts® The Crescent™ Rod WingIts® allow for quick installation of the curved shower rod while eliminating sagging or loosening. Quick, water-resistant installations make it the best solution. Allows for installation in the proper location (3" from typical straight rod installation). Can be used with Stainless Cover Plates. Can be installed into wall substrates (tile, drywall, etc.) up to 1.25" thick. * High strength plastics are used with sealing tape. * Fastening system incorporates into the mounting bracket and will not be visible when installed. * Can be used with Back Plates. * PREVENTS Sag! * Will not loosen over time. Cat. # Description Packaged 26365 Crescent™ Rod WingIt® 1 pair per pack Oval Curved Rod WingIt® 1 pair per pack 26366 9-6 * 31/4" Finish REVISION 04/04/13