Load Cells & Readouts DTR-65 Digital Tension Readout The new Digital Tension Readout (DTR-65) is a powerful and versatile panel-mounted digital amplifier used to display measured tension locally on a machine panel and will multiply a millvolt tension signal to a usable 0 to 10 VDC and 4 to 20 mADC analog output. The DTR-65 is an 1/8 DIN panel mount enclosure that is IP65 protected on the face. It incorporates ease of use and setup with a keypad and a four-segment display, fully programmable low pass filter for each output, tension alarm set points, quick and easy calibration, and even weightless load cell calibration. These features, combined with superior drift and linearity performance, make the DTR-65 an easy choice when needing a tension displayed on a machine panel with the option to also output a tension reference to a drive or PLC for remotely displaying or controlling tension. Features Small panel usage, 1/8 DIN enclosure (same as DTR-65) Setup and calibration through keypad and digital display Weightless load cell calibration Outputs and display have fully adjustable and separate digital filtering One push button for re-zeroing, with optional input for remote re-zeroing Alarm output for high tension or low tension or high or low tension Works with 5 and 7.5 volt excitation sensors with 1.5 to 100 mV/V signals 32:1 gain adjustment Automatic load cell diagnostics/fault indicator Powered with 24 VDC or 100 to 240 76 Load Cells & Readouts