0 to 1 mA Digital Reference Meter and Load Cell Cables These products are available for purchase separately Load Cells & Readouts Features Easy to read LCD with red 15.2 mm (0.6 inch) tall digits Built-in scaling Auto zeroing circuit The DTM Digital Tension Meter is a compact, affordable instrument to display the value of the meter output, 0 to 1 mA, signal from MAGPOWR tension controls and amplifiers. Designed and manufactured using the latest technology, the DTM is constructed of a lightweight, high impact plastic case with a clear viewing window. The sealed front panel meets NEMA 4X/IP65 specifications for wash-down and/or dusty environments Analog readouts are also available, see page 48. Power 3 1⁄2 digit (-9999 to 9999), Minus (-) sign is displayed when current is negative 9 to 28 VDC @ 35 mA max Above 26 VDC, derate operating temperature to 50˚ C Input Ranges ± 1.000 mADC Accuracy (@ 23° C, less than 85% RH) ±(0.1% + 1 digit) Input 10 mA maximum Reading Rate 2.5 readings per second Response Time 1.5 seconds for a step change Input Impedance 200 MΩ LCC Cable Series with 12B220-1 connector shown. Lengths available from 5 to 200 meters in 5 meter increments. 86 NEMA 4X/IP65 sealed front panel bezel Wire connections made via screw clamp type terminals MAGPOWR products with 0-1 mA Meter Outputs Specifications Display Compact enclosure fits DIN standard cut-out: 68 mm x 33 mm (2.68 inches x 1.30 inches) Load Cells & Readouts Terminals Product Negative Positive Usage Spyder 34 33 Tension Cygnus TB4.6 TB4.5 Tension VERSATEC TB3.4 TB3.2 Output Percent DLCA 7 9 Tension TSA 8 9 Tension PS-90/DFC90 5 4 Output Percent DFCA 6 5 Output Percent PS-24 7 6 Output Percent IS-2 TBD TBD Tension DTR-65 TBD TBD Tension SCE Cable Series with 12B193-6 connector shown. Lengths available from 15 to 200 feet.