SAMPE Journal - September/October 2020 - 15

ACKNOWLEDGMENTS
This work was supported by JSPS KAKENHI Grant
Number JP19J12856 and 17H03475.

13. A. Yoshimura, S. Yashiro, T. Okabe, N. Takeda, "Characterization of tensile damage progress
in stitched CFRP laminates", Advanced Composite Materials, 16 (3) (2007), pp. 223-244.
14. A. Bergan, J. Bakuckas, J. Awerbuch, T. M. Tan, "Assessment of damage containment
features of a full-scale PRSEUS fuselage panel", Composite Structures, 113 (2014), pp. 174-185.

REFERENCES

15. J. Herwan, A. Kondo, S. Morooka, N. Watanabe, "Effects of stitch density and stitch

1. T. Kruse, "Bonding of CFRP primary aerospace structures:

thread thickness on mode II delamination properties of Vectran stitched composites",

overview on the technology status in the context of the

Plastics, Rubber and Composites, 43 (9) (2014), pp. 300-308.

certification boundary conditions addressing needs for
development", Proceedings of The 19th International
Conference on Composite Materials, Montreal (2013).
2. A. Murdani, C. Makabe, A. Saimoto, R. Kondou, "A
crack-growth arresting technique in aluminum alloy",
Engineering Failure Analysis, 15 (4) (2008), pp. 302-310.
3. C. Makabe, A. Murdani, K. Kuniyoshi, Y. Irei, A. Saimoto,
"Crack-growth arrest by redirecting crack growth
by drilling stop holes and inserting pins into them",
Engineering Failure Analysis, 16 (1) (2009), pp. 475-483.
4. R. Růžek, J. Pavlas, R. Doubrava, "Application of indentation
as a retardation mechanism for fatigue crack growth",
International Journal of Fatigue, 37 (2012), pp. 92-99.
5. M. Fanni, N. Fouda, M. A. N. Shabara, M. Awad, "New crack
stop hole shape using structural optimizing technique", Ain
Shams Engineering Journal, 6 (3) (2015), pp. 987-999.
6. F. J. Guild, P. J. Hogg, W. Tu, "COMELDTM Joints: A
novel technique for bonding composites and metal", 17th
International Conference on Composite Materials, (2009).
7. S. Ucsnik, M. Scheerer, S. Zaremba, D. H. Pahr,
"Experimental investigation of a novel hybrid metalcomposite joining technology", Composites Part A, 41
(3) (2010), pp. 369-374.
8. P. N. Parkes, R. Butler, J. Meyer, A. Oliveira, "Static strength
of metal-composite joints with penetrative reinforcement",

16. A. Yudhanto, G. Lubineau, I. A. Ventura, N. Watanabe, Y. Iwahori, H. Hoshi, "Damage
characteristics in 3D stitched composites with various stitch parameters under in-plane
tension", Composites Part A, 71 (2015), pp. 17-31.
17. A. P. Mouritz, "Review of z-pinned composite laminates", Composites Part A, 38 (12)
(2007), pp. 2383-2397.
18. F. Pegorin, K. Pingkarawat, A. P. Mouritz, "Comparative study of the mode I and
mode II delamination fatigue properties of z-pinned aircraft composites", Materials &
Design (1980-2015), 65 (2015), pp. 139-146.
19. B. M'membe, S. Gannon, M. Yasaee, S. R. Hallet, I. K. Partridge, "Mode II delamination
resistance of composites reinforced with inclined Z-pins", Materials & Design, 94
(2016), pp. 565-572.
20. M. Kadlec, R. Růžek, P. Bělský, "Concurrent use of Z-pins for crack arrest and
structural health monitoring in adhesive-bonded composite lap joints", Composite
Science and Technology, 188 (2020), 107967.
21. S. Minakuchi, "Fiber-reinforcement-based crack arrester for composite bonded joints",
Proceedings 20th International Conference on Composite Materials, Copenhagen (2015).
22. S. Minakuchi, N. Takeda, "Arresting crack in composite bonded joint using fiberreinforcement-based design feature", Proceedings of 17th European Conference on
Composite Materials, Munich (2016).
23. S. Minakuchi, N. Takeda, "Arresting fatigue crack in composite bonded joint
using interlocked fiber feature", Proceedings of the 21st International Conference on
Composite Materials, Xi'an (2017).
24. Abaqus 6.13 analysis user's manual, Dassault Systems Simulia Corporation,
Providence, RI, USA, (2013).
25. S. Minakuchi, T. Umehara, K. Takagaki, Y. Ito, N. Takeda, "Life cycle monitoring and

Composite Structures, 118 (2014), pp. 250-256.
9. A. C. Nogueira, K. Drechsler, "Analysis of the static and
fatigue strength of a damage tolerant 3D-reinforced joining

advanced quality assurance of L-shaped composite corner part using embedded fiberoptic sensor", Composites Part A, 48 (2013), pp. 153-161.

AIAA/

26. F. S. Jumbo, I. A. Ashcroft, A. D. Crocombe, M. M. Abdel Wahab, "Thermal residual

ASME/ASCE/AHS/ASC Structures, Structural Dynamics

stress analysis of epoxy bi-material laminates and bonded joints", International Journal

and Materials Conference 20th AIAA/ASME/AHS Adaptive

of Adhesion and Adhesives, 30 (7) (2010), pp. 523-538.

technology on composite single lap joints", 53

rd

Structures Conference 14th AIAA, (2012), p. 1893.
10. K. I. Tserpes, G. Peikert, I. S. Floros, "Crack stopping
in

composite

corrugation",

adhesively
Theoretical

bonded
and

joints

Applied

through
Fracture

Mechanics, 83 (2016), pp. 152-157.
11. T. Löbel, D. Holzhüter, M. Sinapius, C. Hühne, "A
hybrid bondline concept for bonded composite joints",
International Journal of Adhesion and Adhesives, 68
(2016), pp. 229-238.
12. R. Tao, X. Li, A. Yudhanto, M. Alfano, G. Lubineau, "On
controlling interfacial heterogeneity to trigger bridging

Machining & Testing
of Advanced
Composite Materials

Comprehensive Testing Expertise
* Mechanical * Physical * Thermal
* Environmental * Fatigue
MMC, CMC, & PMC Experience
Email: info@metcutctl.com
www.metcutctl.com

in secondary bonded composite joints: An efficient
strategy to introduce crack-arrest features", Composites
Science and Technology, 188 (2020), 107964.

w w w. s a m p e . o r g

1775 Carillon Blvd., Cincinnati, Ohio 45240
Phone 800/811-9220 * Fax: 513/851-3336

S E P T E M B E R /O C TO B E R 2 0 2 0

|

SAMPE JOURNAL

|

15
http://www.metcutctl.com http://www.sampe.org
SAMPE Journal - September/October 2020

Table of Contents for the Digital Edition of SAMPE Journal - September/October 2020
