SAMPE Journal - March/April 2023 - 29

Sample
Warpage
BF-PP
No warpage
Image
BF-PP-TCF (0/0) 3mm (along the fiber direction)
(cylindrical warpage pattern)
Table 2. Amount of warpage along with images
for BF-PP, BF-PP-TCF (0/0) and BF-PP-TCF
(0/90). The BF-PP-TCF (0/90) exhibited highest
amount of warpage.
BF-PP-TCF (0/90) 11mm (along the diagonal
direction) (saddle shaped
warpage pattern)
11. Hiremath N, Young S, Ghossein H, Penumadu D,
Vaidya U, Theodore M. Low cost textile-grade carbonfiber
epoxy composites for automotive and wind energy
applications. Compos Part B Eng 2020;198:108156.
https://doi.org/10.1016/j.compositesb.2020.108156.
12. Khan H, Kaur J, Naebe M, Hutchinson S, Varley
RJ. Continuous, pilot-scale production of carbon
fiber from a textile grade PAN polymer. Mater Today
Commun 2022;31:103231. https://doi.org/10.1016/j.
mtcomm.2022.103231.
13. Paramasivam A, Timmaraju MV, Velmurugan R.
Influence of preheating on the fracture behavior of overmolded
short/continuous fiber reinforced polypropylene
composites. J Compos Mater 2021;55:4387-97. https://
doi.org/10.1177/00219983211038615.
14. Matsumoto K, Ishikawa T, Tanaka T. A novel
joining
method
by
using
carbon
nanotube-based
thermoplastic film for injection over-molding process.
J Reinf Plast Compos 2019;38:616-27. https://doi.
org/10.1177/0731684419838070.
15. Yeole P, Alwekar
S, Veluswamy NKP, Kore
S,
Hiremath N, Vaidya U, et al. Characterization of
textile-grade carbon fiber polypropylene composites.
Polym Polym Compos 2021;29:652-9. https://doi.
org/10.1177/0967391120930109.
16. Vaidya U, Hiremath N, Spencer R, Young S, Penumadu
D, Mainka H, et al. Manufacturing Demonstration
of Automotive Seat Backrest Using Sheet Molding
Compound and Overmolding with Continuous
Reinforcement. Appl Compos Mater 2022. https://doi.
org/10.1007/s10443-022-10019-2.
17. Wis AA, Kodal M, Ozturk S, Ozkoc G. Overmolded
polylactide/jute-mat eco-composites: A new method to
enhance the properties of natural fiber biodegradable
composites. J Appl Polym Sci 2020;137:1-10. https://doi.
org/10.1002/app.48692.
18. Tian H, Yao Y, Liu D, Li Y, Jv R, Xiang G, et al. Enhanced
Interfacial Adhesion and Properties of Polypropylene/
Carbon Fiber Composites by Fiber Surface Oxidation
in Presence of a Compatibilizer. Polym Compos
2019;40:E654-62. https://doi.org/10.1002/pc.24938.
19. Haghighatnia T, Abbasian A, Morshedian J. Hemp
fiber reinforced thermoplastic polyurethane composite:
An investigation in mechanical properties. Ind Crops
Prod
2017;108:853-63. https://doi.org/10.1016/j.
indcrop.2017.07.020.
20. Wu T, Tinkloh S, Tröster T, Zinn W, Niendorf
T. Measurement and analysis of residual stresses
and warpage in fiber reinforced plastic and hybrid
components. Metals (Basel) 2021;11:1-23. https://doi.
org/10.3390/met11020335.
21. Collins C, Batista NL, Hubert P. Warpage investigation
of carbon/PEEK discontinuous long fibre thin
panels. J Compos Mater 2021;55:3529-37. https://doi.
org/10.1177/00219983211002247.
22. Song Y, Gandhi U, Sekito T, Vaidya UK, Vallury S, Yang
A, et al. CAE method for compression molding of carbon
fiber-reinforced thermoplastic composite using bulk
materials. Compos Part A Appl Sci Manuf 2018;114:388-
97. https://doi.org/10.1016/j.compositesa.2018.09.002.
23. Wang YY, Wang XQ, Li YQ, Huang P, Yang B, Hu N,
et al. High-Performance Bamboo Steel Derived from
Natural Bamboo. ACS Appl Mater Interfaces 2021;13:1431-
40. https://doi.org/10.1021/acsami.0c18239.
24. Zhang Y, Wen B, Cao L, Li X, Zhang J. Preparation
and properties of unmodified ramie fiber
reinforced
polypropylene composites. J Wuhan Univ Technol Sci Ed
2015;30:198-202. https://doi.org/10.1007/s11595-015-11256.
25.
Huang X. Fabrication and properties of carbon
fibers. Materials (Basel) 2009;2:2369-403. https://doi.
org/10.3390/ma2042369.
26. Taketa I, Kalinka G, Gorbatikh L, Lomov S V., Verpoest
I. Influence of cooling rate on the properties of carbon
fiber unidirectional composites with polypropylene,
polyamide 6, and polyphenylene sulfide matrices. Adv
Compos Mater 2020;29:101-13. https://doi.org/10.1080/0
9243046.2019.1651083.
www. sampe.org
MARCH APRIL 2023
|
SAMPE JOURNAL | 29
SAMPE Journal - March/April 2023

Table of Contents for the Digital Edition of SAMPE Journal - March/April 2023
