Switches & Relays Wire & Cable SOLID STATE DISCONNECT SWITCH • Remotely operate high current circuits Solid State DC Contactors Solid State Battery Disconnect Terminals & Connectors • Compact size and low profile - space saver • Not affected by temperature fluctuations or vibration, making them more reliable option than mechanical switches • Status LED indicator: displays steady on when contactor is on and operating normally, or flashes when contactor has automatically turned off as a result of a detected fault such as loss of ground, overcurrent, under-voltage or over-temperature Max Current Rating 110°F (43°C ) • +7.5-20.0V • Control Input Voltage: >+8.0VDC to activate, <+4.0VDC to deactivate • Control Input utilizes 1 ⁄ 4" male disconnects • 3 ⁄ 8"-16 stainless steel threaded stud • Weight: 0.40 lbs • Dimensions: 2.85" x 4.35" x 1.10" Max Current Max Current Type A Type B Stock No. Mounting Mounting 44401 44402 44403 100A 150A 200A 75A 100A 125A • Battery power shut off • Replaces under seat battery • Internal diode protection for inductive load switching disconnect switch • Control circuit reverse battery protection +12V control & ground inputs 77°F (25°C) • Dimensions: 5.25L" x 4"W x 2.375"H • Power lugs: 3 ⁄ 8"-16 brass studs • Environmentally sealed • Solid state design Tools 12V Wire Coverings Protection Products Clamps & Clips Type A Mounting: Aluminum plate 0.125"x16"x16" or larger Type B Mounting: wood, plastic or air See battery boots on page 115 and .25 push-ons page 17-18. Tapes & Chemicals BATTERY DISCONNECT SWITCHES Switches recommended to mount on negative battery post. Stock No. 44033 Stock No. 44405 Max Current 200A Max Inrush 500A @ 1.0 sec Mating Connector Required (2) 1 ⁄ 4" female push-on connectors (ex: 30511 pg 20) 38170 Amphenol 2-pin plug 38183 Amphenol 2-pin Wedge Receptacle 38197 Pin Terminal 14-16 Ga 38195 Pin Terminal 16-18 Ga • Non-fused current interrupt disconnect designed for Heat Shrink Products Lights & Accessories opening the circuit between a battery and the complete electrical load of a battery powered system • Maximum surge of 2000 amps based on 20% duty with on times of no more than 5 seconds • 1 ⁄ 2" brass, tin plated stud • 8"W x 4.19"H 302°F (105°C) 50 V 400 A 44406* 200A 500A @ 1.0 sec 44407 44408* 300A 300A 500A @ 1.0 sec 500A @ 1.0 sec (2) 1 ⁄ 4" female push-on connectors 2-pin Amphenol AT Series Plug (same as 44406) *Pigtails included Switches & Relays • Cuts off all battery power from the vehicle electrical system • Protects vehicle from tampering, theft and battery drain Top Mount-Opens Vertically Stock No. 44090 Fuses & Battery Circuit Breakers Management Top Mount-Post with Wing Nut Stock No. 44091 Side Mount-Opens Down Stock No. 44092 Remote Mount-In-line Stock No. 44093 • 33/4" W x 31/4" L x 11/4" H 250-750 A • 3" W x 4" L x 2" H • 3" W x 4" L x 2" H • 3" W x 4" L x 21/4" H Cable Ties 106 Order On-Line: www.waytekwire.com 24 Hour FAX: 1-800-858-0319