Battery Management Wire & Cable BATTERY SEPARATORS & INTERCONNECTS • Designed for use in multi-battery applications as a solenoid priority system • Allows multiple batteries to be charged from one charging source or alternator • Prioritized charging, charges primary battery and then remaining batteries • Uni-directional: charge two batteries from one power source • Bi-directional: charge two batteries from two sources • Interconnect/controller: can be used as a uni-directional or bi-directional separator, or low voltage disconnect (LVD), where 185°F (85°C) -40°F (-40°C) Stock No. 80000 SAE J1455 the solenoid opens when battery voltage drops too low, or an Isolator/Interconnect, which provides isolated charging of two batteries from one source • Isolates batteries when fully charged • Protection circuitry absorbs coil generated voltage spikes • Prevents charging system overload • Start assist feature parallels batteries for added power during start • Universally suited for mounting on tow vehicles • 5 ⁄ 16" x 24 studs SAE J1113 Tools Terminals & Connectors Stock No. 80000 Stock No. 80001 Clamps & Clips Wire Coverings Sure Power Stock No. 1314 1314-200 1315 1315-200 3104 Description Battery separator uni-directional with auxiliary start Battery separator uni-directional with auxiliary start Battery separator bi-directional with auxiliary start Battery separator bi-directional with auxiliary start Interconnect/Controller Volts 12 12 12 12 12 Amps 100 200 100 200 300 Protection Products 80001 80002 80003 Tapes & Chemicals 80004 Heat Shrink Products BATTERY SEPARATOR SCHEMATIC INDICATOR LIGHT EYELETS See page 86. See page 26. See page 96. IGNITION SWITCHES Switches & Relays Lights & Accessories BATTERY CABLE See page 9. Battery Management MOMENTARY SWITCHES See page 95. Cable Ties Fuses & Circuit Breakers 108 Order On-Line: www.waytekwire.com 24 Hour FAX: 1-800-858-0319