Terminals & Connectors Wire & Cable Receptacle Housing for Female Terminals Female Terminal Receptacle Housing for Female Terminals Stock No. Molex No. 38301 38351 38303 38353 38305 38355 38307 38357 19418-0008 19418-0007 19418-0005 19418-0004 19418-0011 19418-0010 19418-0001 19418-0002 MX150L™ SEALED CONNECTORS • Waterproof, environmentally sealed interconnection system designed to withstand harsh conditions • Each housing comes pre-assembled with all components • No additional wire seals, wedge locks or CPA locks are required Male Terminal Plug Housing for Male Terminals Application The MX150L is ideal for automotive, marine, off-road, construction, and agricultural equipment, as well as truck, bus and RV applications; and it accommodates a wide range of insulated wire styles from SAE to UL. • Accommodates SAE and UL insulated wire style Assembly Instructions Call Sales to special order other position - up to 16. 1. Crimp terminal. 2. Insert (poke) crimped terminal lead into the housing. 3. Place TPA into its final lock position. Connector Bodies Description Wire Range AWG 22-18 16-14 22-18 16-14 22-18 16-14 22-18 16-14 Plug Housing for Male Terminals Stock No. Molex No. 38300 38350 38302 38352 38304 38354 38306 38356 19419-0008 19419-0007 19419-0005 19419-0004 19419-0012 19419-0011 19419-0001 19419-0002 1x2 2x2 2x2 2x3 2x3 2x4 2x4 Hand Crimper Stock No. 487 ORDERING NOTES: Female Economy Hand Crimper Stock No. 489 Terminals Male Female Terminal Male Terminal Reel Reel Wire Range Loose Piece Loose Piece Stock No. Stock No.* Molex No. Stock No. Stock No.* Molex No. AWG 22-18 16-14 30080 31080 30080R 31080R 19417-0024 19417-0011 30081 31081 30081R 31081R 19420-0002 19420-0001 * Terminals available on reels by Stock No. specified in table above. Special tooling needed for use of reels not available from Waytek. (Molex No. 63813-1500) • Extracts terminals from sealed connector assembly Through Hole Mount Plug Housing Through Hole Mount* Stock No. Molex No. 38450 38451 38452 19429-0025 19429-0028 19429-0029 Rear Mount Flange Plug Housing Rear Mount Flange* Stock No. Molex No. 38460 38461 38462 19429-0009 19429-0010 19429-0011 Gasket Gasket Stock No. 38470 38471 38472 Desc. Molex No. 19427-0024 19427-0021 19427-0022 Needle Nose Pliers Stock No. 494 2x2 2x3 2x4 • Unlocks TPA to release sealed connector assembly * For 22-14 ga wire Stock No. 38390 Molex No. 19417-0119 Package 10 Per Strip Call Toll Free 1-800-328-2724 email: sales @waytekwire.com ® ® 39 Cable Ties Blank Circuit Plugs Battery Fuses & Circuit Breakers Management Switches & Relays Extractor Tool Stock No. 488 Panel Mountable Plug Housings Lights & Accessories Heat Shrink Products (Molex No. 64016-0035) • Crimps 22-14 ga male and female terminals Tapes & Chemicals 1. Select connector body style (receptacle or plug) from chart. 2. Select number of terminals needed – one terminal for each contact location. 3. Blank circuit plugs are required for all unused pin locations. 4. MX150L™ crimping tool must be used to assure a good seal. Protection Products (Molex No. 63811-4400) • Crimps 22-14 ga male and female terminals • Assures a perfect crimp every time Clamps & Clips MX150L™ Tools 1x2 Wire Coverings Tools 600 V 18 A 257°F (125°C) -40F° (-40C°) Terminals & Connectors