Waytek Catalog 225 - 65

Clamps & Clips
Wire & Cable

EXTRA HEAVY DUTY MOUNTING SYSTEM
DUAL SWIVEL SADDLE MOUNT

HEAVY DUTY MOUNTING SYSTEM
Extensively used by leading truck and trailer manufacturers for holding wires and hoses, these mounting systems eliminate the need for a variety of clamp sizes while giving an extra strength holding capability.

keeping items separated

• Mount rotates to any angle • 250 lbs. minimum pull apart force • Heat stabilized • Assembly requires two cable ties,
one around each bundle • Works best with the Super Tie, Stock No. 21295, sold separately

HEAVY DUTY MOUNT

• Heat stabilized UV resistant nylon 6/6 • Accepts all standard ties up to 1⁄ 2" wide
Typical Application

Application
threads, allowing assemblers to pre-install the mount on a stud before securing with a washer and nut (not included)
Stock No. 21256 1/4” mounting hole

Application

HI TORQUE HEAVY DUTY MOUNT

resistant nylon

Stock No. 21295, sold separately

Application

Application
Stock No. 21294

• Mount wire harnesses, cable

• Stand off bundles from frame rails and cross

SUPER TIE
SADDLE MOUNTS

• High impact heat stabilized black nylon • Elevates bundles off mounting surface • Fir Tree Mount: snaps into a 1⁄ 2" hole

• Extra heavy duty, manufactured from
a special high impact nylon resin

Stock No. 21295

Application

• Hold and protect wires, cables,
tubing, conduit, etc.
Fir Tree Mount Stock No. 21291 Button Head Tie Mount Stock No. 21292 Typical Application

wire bundles • 9" long; bundle diameters of 1⁄ 2" to 2.16" • 250 lbs. minimum tensile strength

construction equipment and agricultural equipment

CABLE FASTENING SYSTEM
• 4-way mounting system • Mounts easily to existing studs • Accepts ties up to .30" • Does not work with the Super Tie
Application
Stock No. 21289 Application bit for 3/8” power drill

• Use the Application Bit, Stock No.

WIRE RETAINER for Harness Boards
• Stand-off wire and cable bundles for easier
cable tie applications • 1.22" W x 2.12" H
Stock No. 21470

21289, for fast installation and to ensure proper torque
Thomas & Betts Part No.
XMNY-375-0-D XMNY-500-0-D XMNY-625-0-D XMNY-750-0-D

Stock No.
21296 21297 21298 21299

Stud Size
3⁄ 8 1⁄ 2 5⁄ 8 3⁄4

Application

• Harness board assemblies

Call Toll Free 1-800-328-2724

email: sales @waytekwire.com

Cable Ties

Fuses & Battery Circuit Breakers Management

Switches & Relays

Lights & Accessories

and will hold three bundles • Button Head Mount: uses button head tie (sold on page 142) through the mount and around the bundle; secures up to three bundles

• High resistance against UV rays • Rounded edges minimize stress on

Application

• High vibration situations • Heavy trucking, automotive,

Heat Shrink Products

Tapes & Chemicals

assemblies and hoses • Designed for use with powerassisted impact wrenches

members to prevent them from rubbing and chafing

Protection Products

• Metal insert allows added security • 3⁄ 8" mounting hole (insert) • Accepts up to 1⁄ 2" width cable tie • Works best with the Super Tie,

AXIAL OVAL MOUNT
Typical Application

• Accepts ties from .18" to .50" wide • Mount hole designed to fit a 5⁄ 16" bolt

Stock No. 21260

Clamps & Clips

• High impact heat stabilized UV

Wire Coverings

• Hold wires and hoses

Stock No. 21255 #10 mounting hole

Stock No. 21257 5/16” mounting hole

Tools

Stock No. 21290

• Small tab contained inside the mounting hole temporarily engages

Terminals & Connectors

• Reduces abrasion or wear by

Waytek Catalog 225

Table of Contents for the Digital Edition of Waytek Catalog 225