Switches & Relays • Medium duty • 3' 18 ga wire lead connections • Steam Cleanable/Pressure Washable • Meets State, Federal and U.S. Army Corps of Engineers’ requirements • CE & E-mark Certified for EMC • Voltage spike and reverse polarity protected • Compact size for horizontal or vertical mounting in protected areas 12-24V .3A SAE J994-Type C 24 V 20 A imprint, white on color Stock No. 48019 Stock No. 48020 • 107db at 4' • Compact Size: 4"W x 2.5"D x 3"H • Mounting: 2 slots .5"L x .25"W and • With black ‘Start’ button • With red ‘Stop’ button Back-up Alarm Switch Stock No. 48022 8A Protection Products 3. Choose Contact Elements Stock No. 44018 • For vehicles without an automatic back-up switch circuit E-STOP, PUSH BUTTON & SELECTOR SWITCHES Create an assembly: 1. Select a Control Station Enclosure 2. Choose an Operator Momentary Start Push Button Stock No. 44026 • Available in • Rugged, reliable switches that allow for easy installation 1-hole, 2-hole and 3-hole enclosures • Weather resistant, IP65 Stock No. 44020 rated • 4-hole and 5-hole enclosures available on special order Stock No. 44021 • Normally Closed Red and polycarbonate Adapter • Includes Mounting Stock No. 44019 Selector Switch Stock No. 44025 rear panel locking screws on mounting adapter • Parts sold separately 140°F (60°C) -13°F (-25°C ) • Normally Open Green • Made of polyamide and polycarbonate • Includes Mounting Adapter • Contact elements snap onto E-Stop Push Button Stock No. 44024 Call Sales for details. • Made of aluminum and zinc alloy • Mounting Adapter sold separately • Typically used as an E-Stop Switch • Order the following components to complete E-Stop assembly: Stock No. 44022 Stock No. 44027 Stock No. 44023 E-Stop Disc Mounting Adapter for 44024 Call Toll Free 1-800-328-2724 email: sales @waytekwire.com ® ® 97 Cable Ties the mounting adapter and are keyed to ensure proper alignment • Up to 4 contacts can be fitted on the mounting adapter for each operator - 2 stacked on either side • Contact elements are stackable depending on control station enclosure/panel depth • Recommended maximum stack is 2 deep • Control station enclosures fit one contact element deep 120V AC 6A Typical finished assembly Fuses & Battery Circuit Breakers Management Switches & Relays 24V 3A Lights & Accessories • Made of polyamide • Modular construction with Heat Shrink Products Tapes & Chemicals • Mount adjacent to reverse switch • Spring loaded lever permits over-travel • Normally off Clamps & Clips 2 slots .75"L x .25"W slots on 3.25" centers • 97 db at 4' • Compact Size: 4"W x 1.25"D x 2.5"H • Mounting: 4 slots .5"L x .25"W slots on 3.25" centers Stock No. 44157 Stock No. 44158 Wire Coverings SAE J994-Type B Tools • Repels oil, water and other liquids • Diecast housing, with knurled aluminum facenut • 2 7 ⁄ 32" L x 1 1 ⁄ 8" D (56.1mm x 28.5mm) Terminals & Connectors • Two screw terminals with lockwashers • Mounting stem 7 ⁄ 8"-24 thread • Keyed to prevent switch from turning • Fits panels .04" - .10" thick (1.0 - 2.5mm) • Impact-resistant molded plastic button with 12 V 35 A Wire & Cable BACK-UP ALARMS ENGINE START/ENGINE STOP MOMENTARY SWITCHES