SAE Update - November 2022 - 25

JOB OPPORTUNITIES
SENiOr DiGiTAL SCULPTOr, Warren, MI, General Motors. Plan
&perform advanced surfacing concepts &development of Class A
surface of full vehicle exterior syss. Interpret &define design intent
of designer while collaborating w/ engineering, packaging, human
factors, &tooling teams. Design &develop 3D Class A surfaces of
ICE, diesel, BEV &AV full vehicle psgr car, truck &SUV exterior
cmpnts incl. front &rear fascias, grills, head/taillamps, doors,
fenders, ABCD pillars, skid plates, liftgates, truck beds &detailed
exterior cmpnts incl. door handles, mirrors, lamp internals &exhaust
tips, using Autodesk Alias AutoStudio, Autodesk Maya, NX &VRED
tools, for U.S., global &emerging markets. Interpret, define,
conceptualize &execute unique solutions to technical challenges
&provide creative proposals to capture design intent from
initial concept thru mass production achieved in various stages
according to GVDP, while collaborating with engrg, packaging,
human factors, &tooling teams to assure minimum radii/draft,
tooling &safety reqrmnts in compliance w/ U.S., European &China
standards. Bachelor, Transportation or Industrial Design. 60 mos
exp as Digital Sculptor, Digital Modeler, or related, designing or
developing 3D Class A surfaces of full vehicle psgr vehicle exterior
cmpnts incl. fascias, grills, head/taillamps, doors, fenders, ABCD
pillars, &liftgates, using Alias AutoStudio, NX &VRED tools, for U.S.,
global &emerging markets, or related. Mail resume to Ref#1827-201,
GM Global Mobility, 300 Renaissance Center, MC:482-C32-C66,
Detroit, MI 48265.
DAimLEr TrUCK NOrTH AmEriCA LLC SEEKS A Sr. SAFETY
DEFECT iNVESTiGATOr based out of our office at 4555 North
Channel Ave., Portland, OR 97217. Note, this is a hybrid position
whereby the employee will work both from home and from the
aforementioned office address. Hence, the employee must live
within a reasonable commuting distance of the aforementioned
office address. Note, this position does not require travel. This
position will be responsible for identifying potential safety defects
across DTNA's entire product line, among other duties. Bachelor's
degree in a technical engineering field, statistics, or a related field,
plus 5 years of experience in an engineering position required.
Alternatively, the employer will accept a Master's degree plus 3
years of experience. To apply email resume to Gisselle NunezCastro
at gisselle.nunez-castro@daimlertruck.com. Reference
job number DT-4652.
DiGiTAL SCULPTOr, Warren, MI, General Motors. Plan &perform
advanced surfacing concepts & dev of Class A surface of full
vehicle exterior syss. Interpret &define design intent of designer
while collaborating w/ various teams. Design &develop 3D Class A
surfaces of conventional ICE, BEV &AV full vehicle exterior cmpnts
incl. front &rear fascias, grilles, head/taillamps, doors, fenders,
ABCD pillars, skid plates, liftgates, truck beds &detailed exterior
cmpnts incl. door handles, mirrors, lamp internals &exhaust tips,
using Alias AutoStudio, Maya, Siemens NX &VRED tools, for U.S.,
global &emerging markets. Interpret, conceptualize &execute
solutions to technical challenges &provide creative proposals to
capture design intent from initial concept through mass production
achieved in various stages according to GVDP, to assure minimum
radii/draft, tooling &safety reqrmnts in compliance w/ U.S.,
European &China standards. Bachelor, Transportation Design or
Industrial Design. 24 mos exp as Digital Sculptor, Digital Modeler,
or related, designing or developing 3D Class A surfaces of
conventional & BEV full vehicle psngr vehicle exterior cmpnts incl.
fascias, grilles, lamps, doors, fenders, pillars, skid plates, &liftgates,
using Alias AutoStudio, NX &VRED tools, for U.S., global &emerging
markets, or related. Mail resume to Ref#1730, GM Global Mobility,
300 Renaissance Center, MC:482-C32-C66, Detroit, MI 48265.
TEST VALiDATiON ENGiNEEr, Warren, MI, General Motors.
Gather technical requirements, &design, using DOORS/Rhapsody
tools, ICE psngr vehicle &BEV embedded SW focusing on serial
data communication &diagnostics for ECUs in Body, Exterior
Light, Central Gateway, Rain Sense, &Overhead Console Modules.
Perform embedded ECU testing on test bench &in vehicle, using
dSPACE HIL, &VSpy tools, &neoVI HW, to verify functionality at
Function, Controller &System levels prior to production release. Set
technical objectives &tasks to implement production intent SW for
infrastructure &platform SW cmpnts supporting communication
for ECUs in Embedded C &VBA, Eclipse IDE, using IBM DOORS/
RTC/Rhapsody, &ECM tools, &following MISRA CERT C standards,
&GM SW dev process. Master, Electrical or Computer Engineering,
or related. 12 mos exp as Engineer, setting technical objectives
to implement production intent SW for infrastructure &platform
SW cmpnts supporting communication for ECUs in Embedded
C, Eclipse IDE, using IBM RTC tool, &MISRA CERT C standards,
or related. Mail resume to Ref#31645, GM Global Mobility, 300
Renaissance Center, MC:482-C32-C66, Detroit, MI 48265.
UPDATE
November 2022
25
SAE Update - November 2022

Table of Contents for the Digital Edition of SAE Update - November 2022
