Tech Briefs Magazine - November 2021 - 58

New on the
MARKET
Product of the Month
Dinkle International, Missouri City, TX, offers universal interface modules for connecting equipment signals
to I/O modules. The signals may be discrete (on/off at anywhere from 5 VDC to 120 VAC), analog (4-20 mA or
0-10 VDC), or other specialized signaling levels. The modules and associated cables are available with industrystandard
connectors such as IDC, D-Sub, MDR, and terminal blocks. A single wiring harness routes from the I/O
module to the interface module. Features include push-in design terminations, available LED status indications
for termination points, provisions for clear marking and color coding, reverse-polarity protection, cables in
shielded and unshielded versions, and DIN rail mounting.
For Free Info Visit http://info.hotims.com/79419-120
Power Supply IC
Power Integrations, San Jose, CA, announced
LinkSwitch™-TNZ switching power supply IC
that combines offline power conversion, lossless
zero-cross detection, and optionally, Xcapacitor
discharge functions in a SO-8C package.
It can be used for non-isolated buck and buck-boost power supplies
up to 575 mA output current and provides up to 12 W output for
universal-input isolated flyback designs.
For Free Info Visit http://info.hotims.com/79419-101
DC-DC Converters
ABSOPULSE Electronics, Ottawa, ON,
Canada, offers the PDC 250-HSA-P59 series of
fully encapsulated, convection-cooled DC-DC
converters. The 250W units are entirely potted
with a thermally conductive silicon rubber
compound. They deliver a single regulated output of 12 Vdc, 24 Vdc,
36 Vdc, 48 Vdc, 72 Vdc, or custom. Convection cooling is achieved by
installing the unit on a heatsink assembly block with fins attached to
the under-surface of the chassis.
For Free Info Visit http://info.hotims.com/79419-102
Enclosure System
Rittal North America, Schaumburg, IL,
introduced the VX SE freestanding enclosure
system in sizes that include a 300-mmdeep
version for applications where space is
limited. Features include different material options in carbon steel and
stainless steel, minimal assembly, protection to IP 66/NEMA 4 or 4X,
and dimensions up to 1,800 mm wide.
For Free Info Visit http://info.hotims.com/79419-103
Temperature Sensors
Turck, Minneapolis, MN, introduced the TS+ programmable
temperature sensors that measure industrial process
temperature of a media. They feature a rotating display for
orientation adjustment, stainless steel housing rated to
IP6K9K, and direct and remote mount variations with a
selection of temperature probes, thermowells, and mounting
accessories.
For Free Info Visit http://info.hotims.com/79419-114
58
Cov
Oscilloscope
Rohde & Schwarz, Columbia, MD, introduced
the R&S RTO 6-GHz class oscilloscope that offers
six different bandwidth models from 600 MHz to
6 GHz and a sample rate of up to 20 Gsamples/s.
The unit tests for time and frequency domain as
well as protocol and logic analysis. A dedicated ASIC provides an acquisition
rate of up to one million waveforms per second. More than 90
measurement functions are included.
For Free Info Visit http://info.hotims.com/79419-108
Lubricant
Fluoramics, Winona, MN, released LOX-8 NF oil
that will not fluoresce during black light inspections
in applications such as the maintenance of gas supplies
and filters for laser systems. The low-viscosity
inert PCTFE lubricant is made from oxygenapproved
chemistries and is used on o-rings, seals,
and rubber gaskets, and to prevent galling in mating surfaces.
For Free Info Visit http://info.hotims.com/79419-106
Gate Driver
The STDRIVEG600 half-bridge gate
driver from STMicroelectronics, Geneva,
Switzerland, has high current output and
45-ns propagation delay, closely matched
between high-side and low-side outputs, to handle high-frequency
switching of GaN enhancement-mode FETs. It is also suitable for driving
N-channel silicon MOSFETs at up to 20V.
For Free Info Visit http://info.hotims.com/79419-107
www.techbriefs.com
ToC
Tech Briefs, November 2021
PCB Test System
Takaya Corp., Santa Clara, CA, offers the
APT-1600FD-SL Dual Sided Flying Probe test
system for assembled PCBAs that deploys the
flying probes to both sides of a unit under
test. It features a 10-flying-Z-axis design in -
cluding four vertical flying probes that provide access to test points. The
system is equipped with a vision test system corresponding to color
images as standard on both the top and bottom sides to detect missing,
wrong orientation, and positioning errors on the spot.
For Free Info Visit http://info.hotims.com/79419-104

http://info.hotims.com/79419-120 http://info.hotims.com/79419-101 http://info.hotims.com/79419-104 http://info.hotims.com/79419-102 http://info.hotims.com/79419-108 http://info.hotims.com/79419-103 http://info.hotims.com/79419-106 http://info.hotims.com/79419-107 http://info.hotims.com/79419-114 http://www.techbriefs.com http://info.hotims.com/79419-902

Tech Briefs Magazine - November 2021

Table of Contents for the Digital Edition of Tech Briefs Magazine - November 2021