World Grain - August 2017 - 95

PRODUCT SHOWCASE

ProFume fumigant

Zero-Entry Commercial Sweep

Henry Simon roller mill

Douglas Products' ProFume gas fumigant
with Precision Fumigation tools and techniques
is fully customizable with real-time monitoring
and results documentation. It has been proven
effective on all life stages of insects and rodents
and it will not damage equipment, electronics
and/or buildings when used properly. ProFume
rapidly distributes to where pests harbor and
aerates rapidly on ventilation. It is not flammable or explosive and can be adapted for accommodating business schedules.

The Sukup Zero-Entry Commercial Paddle
Sweep is designed to withstand demands of
commercial grain storage, while being operated and powered entirely from outside the
bin using the Zero-Entry Touch Screen controls. Capacities range from 8,000 to 10,000
bph. A heavy-duty, zero-entry rotating contact
provides power to the sweep. All motors are
explosion-proof and the sweep may be operated in automatic or manual mode. In automatic
mode, controller senses chain load and advances sweep without overloading the chain
motor and preventing spinning of pusher tires.

Satake's new Henry Simon roller mill is designed and built to satisfy the current demands
of the grain milling industry. Available in both
4-roll and 8-roll configuration, it has advanced
sensor and electronic technologies for efficient
mill operation and product quality. The sensors
monitor the essential workings of the roller
mill and operator safety. High sanitation also
has been considered. The machine comes with
a user friendly HMI panel.

Heat reclaim technology

Mobile screener-conveyor

GSI's heat reclaim technology can reduce
operating costs by up to 30%, depending
on the grain type and ambient temperature.
The technology separates the hot, dry air
and returns it into the drying process again,
while taking the cold, wet air and debris
and discarding it through the open bottom.
It is offered with new tower dryers or can
be retrofitted to existing GSI or Zimmerman
tower dryers installed since 2001. The
typical installation time is a couple of weeks,
depending on dryer size.

Flexicon's BEV-CON Mobile Flexible Screw
Conveyor with round vibratory screener
removes oversize particles and reduces soft
agglomerates before conveying on-size bulk
materials from powders and large pellets that
flow freely, to non-free-flowing products that
pack, cake, seize or smear due to compression
or frictional heat. Ready to plug in and run,
the caster-mounted system can be rolled into
position, locked in place with jacking footpads,
and connected to an upstream material source
in several minutes.

THBC series tank,
hopper scales

Cardinal Scale Manufacturing Company's
THBC series electronic load cell kits are ideal for
weighing tanks, hoppers, mixers, and conveyors.
These self-checking load cell kits are available
with mild steel or stainless steel stands, system
capacities ranging from 7,500 pounds (3,400
kg) up to 200,000 pounds (90,700 kg), and
stainless steel waterproof load cells. The THBC
kits are ideal for medium-to-heavy capacity
tank and hopper weighing, new or existing
installations, and accommodate multi-legged
tanks with up to 10 legs.

August 2017 / World Grain / www.World-Grain.com

http://www.World-Grain.com

World Grain - August 2017

Table of Contents for the Digital Edition of World Grain - August 2017