Ecoshield Digital Brochure - 5

USE AND APPLICATION
Drydock
Rudder in drydock grit-blasted, pitting repaired with Ecofix, and then two coats of Ecoshield applied.
* Applied directly to prepared steel, no primer.
* Final DFT usually 1000µm but also 1500µm or 2000µm depending on
requirements (500µm per coat with a 3-hour overcoat time).
* Rudder or other running gear already damaged and pitted can be
filled with Ecofix, a compatible, permanent filler. Ecofix can replace
welding repair in many cases.
* The Ecoshield bonds perfectly to the Ecofix as the basic chemistry is
the same.
* The result is a new, indestructible surface for the steel, other metal or
GRP.
* Ecoshield comes with a 10-year warranty.
Note: Only a rudder is shown in these illustrations but this applies
equally to nozzles, twisted fins, and other running gear.

Ecoshield Digital Brochure

Table of Contents for the Digital Edition of Ecoshield Digital Brochure

Ecoshield Digital Brochure - 1
Ecoshield Digital Brochure - 2
Ecoshield Digital Brochure - 3
Ecoshield Digital Brochure - 4
Ecoshield Digital Brochure - 5
Ecoshield Digital Brochure - 6
Ecoshield Digital Brochure - 7
Ecoshield Digital Brochure - 8
https://www.nxtbook.com/subseaindustries/Subsea/Ecoshield_Advanced
https://www.nxtbookmedia.com